Please ensure Javascript is enabled for purposes of website accessibility Jump to content


  • Posts

  • Joined

  • Last visited

  • Days Won


Everything posted by PierM

  1. Dunno. All I know is if it will happen again I'll hack the unit and separate the jog from the rotary, installing a planar D pad and a separate rotary selector. Waiting more than a month for this rubbish it does drive me crazy really.
  2. I just hope they'll put in some new version, corrected and improved, and not the same rubbish, or will be same problem in a matter of months.
  3. It's my turn. Joystick gone. Sending the unit back to repair. Sad thing, apart the time I'll have to wait, it's I almost never used that part, as I edit 90% of the time with the PC, and the unit never touched the floor, as I use it on a stand... They must be using crappy 2 cents parts or made out of cheese....
  4. PierM

    Flute sound

    Ebow with a flute impulse response. :)
  5. Whatever format you put in the Helix, this one will be converted to 16Bit Mono 48Khz, so in that Sigma structure you need to pick your samples from the 48 folder.
  6. My average feedback on delays is 10/25%, nothing dramatic, and yeah I'm pretty sure it's related to the trail buffer, which does retain some signal from the tuning process, bouncing back when you lift the tuner switch. The workaround I found today, working in da house, is to set a dedicated snapshot just for tuning, with all these effects turned off. I do use volume pedals but position and assignments are changing, depends on the preset, so I can't use it globally. A good fix from Line6 could be NOT sending signal to the trail buffer while in tuner mode, as I think was doing in the past (?), as I really didn't get this problem with old firmware but as some point I stopped using the Helix tuner, so I don't know when this popped in. Sure it does not sounds right. Interesting is that the BANG does vary with different pickups, even at low guitar volume. With my Gibsons it's the worst.
  7. Yesterday I had a really nasty issue which really upset the mixer guy (and I wasn't happy too lol); usually I don't use the Helix tuner but in the past never had this issue, but yesterday every time I was lifting the tuner footswitch, to go back to patch, a huge BANG was bouncing back the FOH, like if you were plugging a guitar in an amp, without turning down the volume. I've noticed this is on all my presets using a reverb and/or a delay. It's like some trail is happening after switching, flooding the output with a big sound BANG. Long story short, I've been asked to not use the tuner anymore in offline mode and almost forced to not use the Helix at all.... Really bad stuff. (XLR output were used) It's that a know issue? I'm on 2.11 btw.
  8. You guys are really missing the ABC of trolling management. Not good move on feed you are again left holding the bag. He's pretty good on his job. :)
  9. I'll drop the bomb; imho the plink issue just does not exist as a technical issue. Every time I asked someone to describe, was about a different tingy, I never seen a single solid description, nor a sound file, that was proving something..and all these reports are all, more or less, description of normal limitation related to how piezo saddles are working and the very basics difference with a magnetic pickup.. There is also loads of people who think a palm mute on top of a piezo saddle has to produce same tone than a palm mute happening after a magnetic pickup (and not on top of it). This is, alone, a proof someone has no clue how a piezo is working, on its fundamentals. :) Now, duck'n'cover....:D
  10. I'm getting overlapped elements and the entire forum is a huge waste of space. I guess they are working on it just now.
  11. What happened with the forum template...?? I'm getting a mess over here
  12. No it is not a customized. Just a "regular" JTV59 made in USA. Not saying they are not good (at the opposite I've read good words on those), but considering it's a totally niche market, and it's a refurbished one, I'm expecting this guitar sitting there forever. I honestly would be tempted to buy a US 59 (I do love my Korean JTV59!!) but I can't stand a price tag that high because used market it's basically non existent. :)
  13. 3999$ for a refurbished US 59? U kidding me? :D
  14. It's for sure a niche effect, but modeling it is dedicated to a niche market, which usually is mostly composed by musicians who likes to experiment outside the typical set of pedals you could buy alone. Usually it's also a good system to know, approach and learn a new range of effects that you could lately buy in a different form (standalone, rack etc). For example, beside the amount of delays in the Helix, there is nothing (ATM) capable to beat the old good DL4. :) As for me I'm a big user of pitch shift and intelligent harmonizers, in various forms, so for me would be a blast to have a polyphonic PS.
  15. The only entity which could say it's not possible, is Line6, but even in that case I would say it's more because they don't want to invest in such pipeline, and I could understand. ;) These days you don't need that huge power you were asking your processors for old FFTs, working (bad) with linear scaling. It all depends how they want to implement such effects (if they want). There are several available approaches to solve same goal, more or less efficient, more or less good. It also depends if they want to add advanced transients detectors, heuristics trackers and much more math in the middle of the pipeline, to reduce tone artifacts before hit the out, but in general we are not talking about flooding DSPs. Sure I would expect some input latency, but that is another kind of issue. It's really a tons of constants and few algos. I would honestly expect a block a bit more demanding than actual harmonizers. Imho problem here it's not the processing power (which by the way should be declared by L6, not by their users), it's to find the time and resources to write down a good set of algos to compete with those stomps. I'm not holding my breath on this, but don't tell me is because it does require more power than the one the Helix has already. That is task overestimation. :)
  16. It's not 1995 anymore guys. Helix is more than good to run a polyphonic pitch shifter.
  17. ^ This! ^ Serializing multiple stereo effects, one after the other, its just flooding the signal and making everything muddy, other than kicking on DSPs....
  18. I can't believe there is not a moderator to delete this stuff and ban the guy....
  19. Sorry but I have to disagree about the "IMPOSSIBLE" dogma. You can't probably imagine what you can do with few bucks of proper electronics, a LCR/pass filters etc...... but yeah, as soon as you have to route more holes for circuits I would probably ask myself why not put a neck pup. But, in general, it's possible. Not gonna sound exactly as a real neck pup but your OP was not asking that. :)
  20. It's mostly about quality of the algorithms. I don't think Helix has any lack of processing powa to do same or even better than that stomp. It's for sure true that EHX are masters on that area.
  21. You can made an Helix patch that shapes out the high end and push the curve on the bass side, but you'll probably also needs to cap your highs through the volume tone. Also you should learn to pick on top of the bridge, for the bridge tone, and pick on top of the "missing" neck pup to bring back some mids and limit the harsh attack of the pup. It's something you could also do with an active PCB (equalizer + band pass filter) to be hosted in a body cavity. This would probably be the best option. It will NEVER sound 100% realistic, but you can for sure tame the bridge tone to make it sounding more rounded and "neckish"..
  22. Believe me, I'm not a fanboy and I also don't like the way other people here sometimes overreacts to product critics. It's quite annoying but this is the Said that, I still don't get the point for this thread. What you were expecting exactly? I mean, I guess you've done a forum search before start the thread (don't you?), to see if other people were getting your same "issue", and then hoping for a tweak and fix to try your own. But instead of that you started a thread with just all answers ready to whatever obvious question. You basically bounced everyone over here, every single suggestion, every single question, every guy trying to help....and now that you return it, you are still here talking about something you didn't like at first and you don't have anymore. I mean, seriously? All this time you are wasting here it's time you should spend in a better way, if not with your friends, with a Kemper, which by the way has a digital fizz. I'll start a thread on Kemper forums soon. (kidding I don't have a Kemper) Ciao ciao.
  23. Good question. I also heard the discount will be for US customers only. :( Is that true?
  24. PierM


    Give your Helix a proper case and no more bumps. :) EDIT: btw, just tried side pulling and hitting my XLRs, I can't get any pop on the signal.
  • Create New...