Jump to content

toneman2121

Members
  • Posts

    761
  • Joined

  • Last visited

  • Days Won

    5

Everything posted by toneman2121

  1. a global reset and pedal cal is required after reflash
  2. i say re-flash the firmware do a global reset and cal the pedal
  3. i would venture to say most of the users who are getting good results are the people who are doing what your doing. get the basic operation down and start turning knobs. pick an amp get it sounding good and add flavor. of course there's always meambobbo... http://foobazaar.com/podhd/toneGuide/
  4. so do you have a pod xt or a pod hd
  5. if your pod is not connecting to monkey then perhaps you have a bad cord.
  6. your hd 500 is not connected. first connect the pod and turn it on, then run monkey, then select update. follow the on screen instructions
  7. before selecting a patch, set the volume and drive to zero. one of potentiometers may be faulty and subject to movement causing a volume change
  8. when updating, your pod must have flash version 2.0 or higher to use usb for updating. otherwise a usb to midi device is required. m-audio midisport uno is recommended.
  9. if you mean button, which button? if you mean bottom?, the bottom of what? you should start another thread and explain in more detail your problem , the bottom of what
  10. we must resolve this outrageous oversight with the utmost urgency. i'll have my people contact your people and together we will triumph over line6's atrocity. :angry:
  11. something must be lost in the translation because it sounds pretty nasty to me
  12. i pretty sure you have to reflash the firmware to get back to default settings. as far as keeping your settings, just save them and you can recall them if you happen to change them
  13. your amp may be one that is covered by bulletin 59. the transformer is the subject of that bulletin. call line6 and inquire about it. certain serial numbers are affected.
  14. Further more the Digitech modeler, at less than one hundred dollars, let me know when it's released
  15. here's a sample from amazon http://www.amazon.com/Energizer-Value-Charger-Rechargeable-Batteries/dp/B00339NINQ/ref=sr_1_2?ie=UTF8&qid=1379856704&sr=8-2&keywords=rechargeable+energizer+aa where are you located?
  16. interesting tube read http://www.marshallforum.com/workbench/10610-nos-tubes-vs-new.html
  17. if you are supposed to use alkaline, aren't those 1.5? i don't see any detrimental effect using batteries with a slight voltage difference. you can also use alkaline rechargeable's. they are 1.5.
  18. at this point i'm not expecting an update at all
×
×
  • Create New...