TheRealZap

go into the pod menus and change the sample rate on the spdif. most likely one of those settings will clear up the issue.

I don't believe that it's possible. I think the computer capabilities came with the MKII version of the SV. someone can correct me if i'm wrong, as i don't own the amp.

noone here is going to help you with this... contact line6 and ask... thats all you can do... http://line6.com/company/contact/ noone from support or product/software development is ever going to see this... you can gather 20 pages of minions that back up what you're saying... and still noone here can help you.... even if we assume you are 100% right... we can't help you... even if you have the ex1... WE can't help you... follow the link above and speak to someone that can tell you what they know... or pass the info on to someone that needs to know...

I assumed it being chipped to 2.0 and not originally a 2.0 that there was no chance it would have the FBV connection. worth checking, surely...

I suggest you contact support: http://line6.com/company/contact/ you can give them a call or open a support ticket. The ESN issue sounds like you might need a service center, but support can better advise you.

I mean they aren't going to help you with YOUR pedal because its not an EX-1 which is the only pedal they support. you can tell them about your issue, and suggest it may affect the EX-1 as well... and they may look into it... but it's been over a year since we've had a substantial update to the pod HD series.... (with the exception of the recent L6Link related update) I can pretty much assume from that the issue must have existed for at least a year now... (if it in fact does affect the EX1) and they weren't in a hurry to fix it if they knew about it.

my thoughts are that you should contact them and discuss it with them.... just be prepared, as they may say "no ex1, no support" http://line6.com/company/contact/

No, the board won't use the usb and the rj45 at the same time, with the exception of updates. making what you are asking impossible.

The DT50 2x12\4x12 has V30's in it as well as the GH, so it's likely going to give you usable results... i've not heard of anyone else doing precisely this, but being a subjective area anyway... i'd just give it a try and see if you like it.

standard cat5/cat6 cable: http://line6.com/support/page/kb/_/legacy-products/effects-and-controllers/floorboard-fb4-fbv4/line-6-floorboard-and-fb4-faq-r507

if you like and enjoy the editing on the pc/mac the HD will be a huge upgrade via usb. lots of new effects and improved sound quality... i think its worth it... and sweetwater is having a nice sale on them too... 199$ i think. dont think it can use your old floorboard though...

Yeah i was aware of their fix, not familiar with specifics of it... but i do know that the EX1 has stayed the same. I think missions original design just did something a little differently to achieve the same result (in theory) it was apparently different enough to require the mod they offer.

officially the resistance is 10k. this is done with the stacked pots... so the pots themselves are whatever value = 10k stacked (as i said... not an electronics guy)

didn't notice any anything connected to the board except the jack and the pots, which seems to match up with the solder points on the board. I dont regularly use it at all (i actually have 2) but i have used it with the 500, the m13, the m5, and the FBVMKII (pod hd bean and pro x) always worked as expected. but it was usually just some experimentation... so not really being that particular.

there are no extra resistors etc... the firmware in the pods/m-series is looking for certain values... its that simple... i'm sure that marketing had nothing to do with it... if there was that much money to be made we'd probably have a new model by now... whatever wiring decisions that were made were made a long time ago... and may have more to do with the original pod than it does with the current pods... the current pods more than likely inherited whatever limitations the old pods had in the name of compatibility.

this probably wont help you much... but i took the back off of it and took a picture... not wanting to tear it down any further... (as i said i'm not an electronics guy)

i'm not a line6 employee, and i was only pointing you to a supported solution, since you appeared to want support. there is a link at the bottom of my posts that explain the line6 expert tag... but i can with near certainty say that your expertise with electronics is greater than mine. i know how to use the gear, and deal with it's quirks... i could not build or modify the gear. we're not going to delete your post... it's useful information to the community if you are able to help people use what they already have. and plenty of users here will gladly discuss these mods with you... all i was saying is that Line6 as a company will not support your activity... whereas Line6 as a community will possibly of their own free will.

are you sure you have a pod farm 2 license? you may only have a pod farm 1 license... just a guess since i have no idea what interface you have, or when/if you purchased a pod farm 2 license separately.

you can even use pod farm 1 as a plugin... (or gearbox for that matter) do you have a blackface UX2? the redface ones didnt come with the plugin license. i suspect you may need to check the license manager to make sure the licenses are authorized.

check the inputs maybe?, have you connected it to line6 monkey and upgraded it? (you may lose model packs...)

sounds like you are on the right track... you have the technical part down. and yes everything is possible... but only one thing is supported... big difference. i've had an EX1 for about 10 years with no problem... sure it looks cheap and plastic... but it just works. anyway, try being less hostile... you're not always going to get only the answers you want out of life.

pedal 2 works and is supported only with the line6 expression pedal... any issues using other pedals would need to be addressed by the maker of the pedal... the only one i know that is not line6 and supports use with line6 gear is mission engineering. from being on these forums for years i can tell you, there are more 3rd party pedals that don't work than there are those that do. doesn't sound like a line6 issue to me, since they do not claim support any other expression pedals.

1. depends on what you are playing through... as that's the general purpose of that setting. use your ears and use the one that pleases you if you disagree with the "correct one" 2. sounds like it wasnt saving properly, i can't think of a scenario that would otherwise produce this result.

you really need to contact line6 directly or an authorized service center to get any kind of an accurate answer on that: http://line6.com/company/contact/

i know it has at least one knob on it :)