phil_m
-
Posts
9,303 -
Joined
-
Last visited
-
Days Won
180
Everything posted by phil_m
-
The MIDI commands in the Command Center are sent out of the Stomp’s MIDI out jack. They aren’t fed back to the Stomp itself. You could run a MIDI cable from the Stomp’s MIDI out back to its MIDI in, but that gets to be a little tricky as you have to be careful you’re not creating a MIDI loop.
-
Are you letting the receiver search for the best wireless channel by having it set to Auto in the Global Settings menu? If you have it set to Auto and plug the transmitter into the Guitar In, that will search for the best channel. Ideally, you’d want to do this when every other piece of wireless gear is up and running. As far as the expression pedal, go to Global Settings>Switches/Pedals>EXP 1 (or 2) Position and make sure it’s set to Global if you want to have the settings always reflect the physical position of the pedal.
-
The issue with the Helix, there isn’t just a single cab block per preset. You can have up to four cab blocks in a preset, and you also have the complication that there’s a separate IR block. So it’s possible that someone has a preset where they switch between two different cab blocks or a cab and an IR block… And there other scenarios beyond that. It’s not something that lends itself to global changes. What I do is simply have separate presets for going direct and for plugging into an amp. I gig both ways, and I’ve just found that to be the easiest way to do what I need to do.- 24 replies
-
- 1
-
-
- helix floor
- cab
- (and 2 more)
-
Was there a bright light hitting it? The sensor is optical, so if light is hitting it, it can be problematic. Most often it happens because of sunlight, but I have occasionally heard of it happening because of stage lights.
-
https://line6.com/data/6/0a060b316ac34f0593fabe278/application/pdf/M13/M9/M5 FX Parameters - English ( Rev B ).pdf
-
Yes, the G10TII transmitter will work with the original G10 receiver. The receivers themselves haven’t actually changed. It’s just the transmitter that’s been updated.
-
I actually found the Gamechanger Plus pedal tone harder to use than the Poly Sustain as far as reliably getting it to sound good. As mentioned above, catching the chord as it starts to decay is the key to getting it to sound right.
-
Yes, this is the reason exactly.
-
Hmm… Doing the factory reset should get you the presets. Are you doing the reset where you hold down footswitches C & D while powering it up?
-
Well you aren't clipping the input if you aren't hearing clipping on every preset or with every amp model. It's not really possible to digitally clip within the signal path itself, but you can overload certain blocks. You could also be clipping the output converters or whatever you're plugged into. This is probably more likely than clipping the input.
-
Where is the Workbench software download?
phil_m replied to jbernard54's topic in Variax Guitars / Bass / Workbench
Same place all the Line 6 software downloads are: https://line6.com/software/ -
Are you using the Vintage Digital Delay model, per chance?
-
How are you connecting them? And how are you monitoring everything?
-
Relay G10TII Transmitter - Battery Duration Test
phil_m replied to PierM's topic in Relay Digital Wireless
You don’t need any additional equipment. The receiver is built into the amp, and you charge the transmitter by plugging it into the amp’s guitar input. -
You said you don't understand snapshots, but what you're describing here is essentially how snapshots work. What is it you're having trouble with, exactly? This is a good tutorial on how to set up snapshots from scratch.
-
Yeah, as @spaceatl noted above, you want to control the Mix parameter. Just realize that the Mix control is really a wet/dry balance control, and at 50 you have 100% dry and 100% wet. So if you don't want to affect the dry level, you need start with it at 50 or less and than back off from there.
-
Every preset contains 8 snapshots, and those snapshots are independent of what’s happening in any other preset. Are you creating a copy of an existing preset? If you do that, yeah, all the snapshots that are in the original preset will be in the copy. But you can still edit and rename them as you wish.
-
BEWARE! Line 6 NOT Mac Friendly
phil_m replied to jhhorvath's topic in POD Farm / POD Studio / TonePort
There won’t be M1 support for the Toneport devices, no. -
You need to download and install the latest version of Native. I’m not sure what version of Native you’re using, but I can tell it’s not the latest one from your screenshot. The latest version (3.10) has a Favorites tab just like HX Edit.
-
I believe those presets are write-protected. You should, however, be able to edit them and save an editable copy in another slot, as far as I know.
-
It sounds to me like the micro switch might be malfunctioning. In any case, open up a support ticket, and they should take care of it.
-
If you push down the micro switch on the ring where the plug is attached on the transmitter, does the transmitter light up?
-
Reminds me of the bumper sticker - "the only constant in all of your failed relationships is you..." Seriously, though, I've owned many pieces of Line 6 hardware (well into the double digits), and I've only had a few actually fail. One was a defective power amp in a Duoverb amp, and the other was an issue with my Variax 300. Line 6 fixed them both for me. So I'm sure you can get your HX Effects replaced needed. But have you gone through the normal troubleshooting steps? Have tried a factory reset? What is your setup that your hearing whistling?
-
FUNCTIONS OF FBV EXPRESS MKII
phil_m replied to jaanquito's topic in FBV Controllers (MKI / MKII / 3)
Hi - This controller has pretty limited functionality with the Spider V (well with anything, really). The four footswitches allow you access four different presets within a bank, and the pedal allows you to control volume and the wah (or whatever other parameter you have assigned to the expression pedal). It also gives you access to the tuner. That's it.
