Triryche

Yes you can use the TT as your soundcard. No you do not need to re-amp, but you can send a dry signal if you want to use other plug-ins.

Yes, it should work with the tablet. Depending on the firmware it was shipped with you may need to update it via pc or aniOS device to get Android comparability. The is no pc editor at this time.

Did you run the license manager?

Is the app prompting you to lo in?

You need a JTV Variax guitar.

Yes, you can turn off all the amp/cab modeling and effects.

Are you using the Line inputs with a blank patch? When I use my keys I have a blank dual path set-up with Line 1 panned hard left and Line 2 hard right.

Try using POD Farm 1.12

You can also download and run the driver installation file without using Monkey.

Search the cloud via your iPad within the app. No, Helix patches do not translate to the Firehawk.

Are you leaving the Relay plugged in when you're not jamming? There will battery drain if anything is left plugged in the 1/4" socket.

Are you using the newest version of Monkey?

If you haven't already, try adding a preamp model in the signal chain in POD Farm.

Did you try reflashing it? It's possible the previous owner has a custom tuning stored.

:lol: :lol: :lol: At first glance I thought it was an alternate tuning!!

The TT stores 100 presets. You can access 4 presets (ABCD) directly on the AMPLIFi. You can access, create, and edit all 100 patches via Bluetooth with a compatible iOS or Android device without the need for a Wi-Fi or cellular connection. You can record directly to a DAW via USB. Without a Wi-Fi or cellular connection you cannot save to My tones our search the cloud for tone matching. (My Tones are tones you save to the cloud on your Line6 account).

You can record up to 2 inputs at once. 2 mics, guitar and mic, or 2 Line In's. In POD Farm select the appropriate sources in the mixer view.

Have you ever tuned a Floyd Rose or other floating tremolo? Try tuning your low E, then high E, A, then B, D then G, it should cut down the amount of "passes". My JTV89F stays in tune for a long time, and I'm definitely less than gently with it (especially when I forget it's not an actual acoustic!!).

+1 I have even had vibrations physically conduct via my headphone chord.

You can use a breakout cable like this: https://www.amazon.com/Y-Cable-Splitter-Computer-Multimedia-Speakers/dp/B00ZKM3S4S This would be my preference, a lot of gear uses 6.3mm https://www.amazon.com/Stereo-Male-Plug-Mono-Cable/dp/B00D6IMHBI with https://www.amazon.com/VCE-2-PACK-Plated-Female-Adapter/dp/B01GPQJ5DA (just examples, not necessarily these brands)

If you do not need to record a mic or guitar simultaneously with the Korg, I would suggest using the 2 Line Ins on the UX2.

Did you test to see if the Left main is mono if you have nothing plugged into the Right main out?

If you are not able to update the firmware with an iOS device or USB cable, PC, and Line6 Updater, I would submit a support ticket.

Yes.

Yeah, it could be a model pack thing. Basically the POD X3 unlocks all the models if connected. It could also be a POD Farm 1 vs 2 thing. Yes both can reside simultaneously so it may be just a mater off installing PF 1.12. If it is a matter of installing PF 1.12 and there's a model back missing, it should still open so that you can see what is in the signal chain.