spikey
-
Posts
3,020 -
Joined
-
Last visited
-
Days Won
53
Everything posted by spikey
-
Ibanez AZ2204 The pickup selections/tones are much more diverse and sound killer, and this is coming from a strat guy.
-
And that is the shortest post I've ever seen you make here ; )
-
Using stage monitors with individual feeds for each member? Done...
-
Me too- L6 Link is connected/set up here on two Powercab Plus units and just waiting for the update.
-
So when is 2.9 coming out and will it have a tuner in the editor?
-
Im thinking that once 8.2 hits most things will be updated. I will be using HX edit and using the L6 Link port on Helix to control both PC +'s speaker cabs, mic, etc then. If PC Edit is also updated as well, Then I will redo some audio inputs and outs to allow my Kemper to also use the PC+!
-
One thing I love about the Power Cab + is that you can turn it all the way down, and it will still send (one of the 6 or 7) speaker simulated tones out to your studio monitors, FoH, another FRFR, etc. !
-
And one more.... Where's the tuner for the editor?!? Thats NOT gonna happen (and neither is my tuner im thinking), and will continue as series two is coming soon bud lol! ; )
-
Legally speaking Silver is right, however If somebody really wants a copy of Native bad enough they can find one.
-
Opposite of a downdate im told...
-
There is another magical solution, you could just turn down a bit and the rattle in your homes (and heads) will disappear. ; ) Erum..., now where'd they put that tuner in the editor?
-
A whole 5 days? Wow...... No sleeping or going to potty? You must be constipated by now, and that can effect your mids too.
-
Then it would be a nasty clip, caused by no tuner in the editor...
-
Well I could see the PA pop if I turned anything off feeding the mixers output to the amp/PA, but these are not being fed down stream from another source. So where is the pop coming from then? Sure the work around is turn the volume down to lessen the loudness of the pop when pwr off, but you shouldn't have to do that I'm thinking. Why? Cause It pops loud without anything connected and the volume up. There's a bleeder cap not bleeding off right I'm thinking.
-
I bet it was the lack of a tuner in the editor..
-
And theres the reason why when its all said and done, Ive kept my Helix... ^^^^^^^
-
Oh I get what you're saying. You have second thoughts after a broken unit. Hey it's all good and you do with yours what you will, as will I. I'm just saying that the cost to ship it for a repair may be cheap compared to time spent having a blast with it later. What ever you wind up with the old saying will still apply, you usually get what you pay for. And as far as broken stuff these days out of the box, it will happen no matter what it cost, but that's not the norm again, in most cases. That includes Line6 as well.
-
Is Line 6 charging you the 72 bucks for shipping, or is FedEx/UPS charging this fee? It makes a difference as to who's the blame for the expensive shipping cost. And Line 6 is fixing it for free, and then shipping it back to you after the repair for free as well? Pardon me but that does not sound that bad a deal. As far as getting a bad unit it happens a lot these days, with everything. OTOH my Helix rack has been running well for over 2 years now, and I'd gladly pay $72.00 to have it repaired if/when it needs it. A dinner for two at a fancy restaurant is about the same cost and that price doesn't include a movie or popcorn either. ; )
-
What pb said. Back up, then reinstall the last update (2.71I think) and test. If it does it again after that, turn in a ticket for repair is all I would know to do.
-
Already have another use for the midi cable Ive run across the room for the PowerCabs.
-
I do PICK MEEEEE!!!!!
-
Id like to be able to (at times) mute the speaker on the PC+ and still send the Line level outs to the board for recording into a DAW. Is there a way (midi command or otherwise) to do this? EDITED: Well, I just found out if I lower the volume knob, the speaker output quits working on the PC+, but still outputs (Line Level) to the board from the XLR output... I didn't think it would work but it does!
-
Is there any way to stop the loud "POP" when powering off the PC+, other than turning the volume down before switching off power? Or is this normal?
-
Yep, my bad didn't read it correctly so I hope you sell a million of um! ; )
-
Yes, I am. And I also have to restart the right PC+ to get any sound sometimes. It will have sound, then pop and no sound on right PC+. Once I restart it, it comes up ok most of the time. Acts like a midi conflict of some sort causing this, but each PC+ is set to its own midi channel.
