Search the Community
Showing results for tags 'not'.
Found 11 results
-
So I went to play on my toneport for the first time in like forever. Had it installed on a previous computer and it worked fine, now, no matter what usb port I plug it in, I constantly get the red flashing clip lights, sometimes the volume panels will be lit up but the lights are still flashing and the device is acting like it cant connect. I've downloaded the most recent drivers from Monkey, but after I install them and go back to Monkey it says the drivers are not installed. I've searched all over for people who have had similar problems but they, like myself, can't seem to find any answers anywhere. Help, anyone? -
This strange thing happened to me today, i plugged my hd400 and after booting i noticed that the presets triggers ABCD weren,t working, not even the green lights, the mode switch neither, all the other buttons were functional, i can change amps, effects, tweaks, i can even change banks number, but cannot select any of the letters in the selected bank number. Please help, is this a firmware issue or a hardware problem¿¿¿
-
well, I tried to set up my pod farm on my new computer setup. I haven't tried to install any of the software onto this rig yet. Upon doing so, I had an issue with the device staying authorized and with pod farm 2.5 also not being recognized as licensed even though I have the licenses for them. I was wondering if anybody had any insight into why something wouldn't stay authorized. I did deauthorize my PC and attempted to reauthorize it/the ux2 and now I have no dice. -
So for the last couple hours I have been setting up my new AT2035 with my new Line 6 UX2, but so far I have installed everything I need to install, I have the XLR cable in the right spot and the USB connected in the back. But no sound comes through, almost like the mic isnt even on. AND YES I have tried switching from "instrument" to "mic 1 or 2" still nothing. I am running out of ideas at this point.. PLEASE HELP! UPDATE! I have gotten PODFarm to actually pick up my sound, BUT NOW whenever I talk into my mic it is just straight static and nothing else. -
I've got a bunch of Glenn DeLaune presets and they work great. They are the stripped down amp patches. He basically took all the amps in the Helix and put them in as Snapshot 1 (amp drive = 3.0) / snapshot 2 (amp drive = 4.5) / snapshot 3 (amp drive 6.0) and snapshot 4 (amp drive = 7.5) - pretty basic so each shot is a little crunchier...so why is it when I'm trying to have only 1 amp and change the drive from snapshot to snapshot - it's not remembering? anyone else having these issues? thx K
-
So I find this question asked everywhere but also given the same answers so I'm hopping that someone has a different answer for this. I am running a Shure sm7b connected to the UX2 then to my computer running Windows 8.1 I had this system running for a good year then recently when I updated my computer, I re-downloaded podfarm and Line 6 Monkey to make sure everything was up to date plugged in and nothing.... I know the Shure sm7b does not need Phantom Power but also does not hurt if it is on so I tried both on and off still nothing...the gains are turned up the output is turned up inputs set to microphone everything is in order as it was previously and still nothing. I read somewhere that the sm7b needed a high pre-amp or something like that, but like as I said I had been running it for about a year perfectly fine. To double check it wasnt the XLR cable or the Microphone I changed out both I went back to my Audio-Technica AT-2035 enabled Phantom power on it and still nothing. I do not know this program any more than plugging it up setting the input to Microphone changing the tune to Studio Vocal and it working. So if there is a fix please do explain it and how to get to it because if you say change this to this chances are I wont know where to locate the change. Please help and Thank you!
-
Hi, I was playing guitar with my amp spider 3 and when changing channels with the pedal FVB express the amplifier became stuck and did not emit sounds and no buttons worked. I decided to turn it off and on, but when I turned it back on no buttons lit up and even the saved presets would not load. the preset display only had a few black boxes. please help this is the only thing that can work at this time and it cost me a lot to have this amp. because i do not want to lose it, thanks in advance.
-
Hey, Just bought a POD X3 Live from a friend, he said his POD worked with the Monkey program. I have tried just about everything, but windows 7 doesn't recognize the pod, and Line6 monkey/gearbox say its not plugged in. Do I have to put the device in usb mode or something, what am I doing wrong. I really don't want to have to get my money back from this guy, this device is pretty cool... Thanks, godbless. Device: POD X3 LIVE OS: WIN7 64 BIT CPU: I5 3570 (3.8GHZ) GPU: HD 7750 RAM: 8GB 1600MHZ HD: 500GB, 250GB, 160GB
-
I have a mesa boogie stereo amp setup and i love the sound of it and dont want to color the sound using my hd400 which i also love but how can i make a preset that does not effect my normal amp tones no change at all to my amp tone i want to be able to create patches that start with my clean tone (boogie) be able to use a patch (hd400) then go back to the clean boogie n use my seperate boogie footswitch for overdrive using the amp only as well as be able to switch back and forth between hd400 patches at will. When i use the fx mode (hd400) and i bank up or down it doesnt go back to fx only it stays in bank up or down mode only any help would be greatly apprecc thanks this has really limited my use of the hd 400 ron garf
-
Please help if you have had this problem or know what to do.
-
Hi, i wonder if its nomal to set the noise gate threshold to like 35-20 (i do that), and also does anyone know how to get the noise away when you do those super long chords?
