Triryche
-
Posts
4,254 -
Joined
-
Last visited
-
Days Won
15
Everything posted by Triryche
-
WorkBench HD UpDate?
Triryche replied to musicimpossible's topic in James Tyler Variax Guitars / Workbench HD
There was this post a while back: http://line6.com/support/topic/26356-did-you-get-the-variax-survey-email/ -
Pod Farm 2.5 install problem
Triryche replied to markusU's topic in POD Farm / POD Studio / TonePort
Download PF2 from the downloads page. Then run the license manager. -
With the exception of the omission of the Dimension Mod based on the Roland Dimension D. :mellow:
-
the info will likely be announced at release.
-
Use the AUX In.
-
Your POD X3 should have a POD Farm 1.12 license. Use the PF plug-in within your DAW.
-
Sonically they are the same, however, the signal chain in PF2 is more flexible, and you likely had the plug-in also with the POD Studio.
-
I would try a slpitter box and send your guitar signal to both the SDRUM and POD HD and send the mixer out(s) of the SDRUM to the POD's Aux cd/mp3 in.
-
The older red-faced Toneports will only authorize PF 1.12 for free. The exception would be if it was 1st authorized after a certain cutoff date, I do not remember the date, but it is not common. You could try contacting support via phone or ticket to see if there is anything they can do.
-
Yes, you need to first update via MIDI, FW 1.01 does not support USB for flashing.
-
You will not know for sure until you try it. There are too many variables with PC's that you may not be able to rely on specs alone.
-
Are you using a clean channel on the Spider?
-
If you are using an ASIO interface it would be mostly a function of your DAW and computer. Running Reaper with a non Helix interface on a PC I built in 2010 the latency is barely perceptible and defiantly playable.
-
Install the latest, the updates are not cumulative.
- 1 reply
-
- 1
-
-
Sony MDR 7506 can be had for under $100 and has served me well over the years, and you can get replacement parts, though I only ever had to replace the ear padding.
-
When you use the Helix as your interface, the computer sounds will go through the Helix also. IMHO, you are better off using a good set of headphones to monitor your guitar playing until you can get upgrade you speakers.
-
It is the one Mr Arkadin mentioned that Line6 recommended in the past. And yes, M-Audio well known reputable brand.
-
HA!! I just quoted you. That is great advice for any AMP sim plug-in.
-
HA!! Cross post!! Was going to post a link to that type of cable.
-
What I cannot see from the pic is if the 2 1/4" to the female, is if the female TRS, chances are it is, especially if the L R labels came with the cable. I also cannot see if the adapter or aux chord is TRS, if one of them is not, then that is the issue.
-
Actually the AMPLIFi holds 100 presets, 25 banks of ABCD, but you need one of the compatible foot controllers or the AMPLIFi Remote app to change banks.
-
All the model packs that came with the Silver DI are tied to the device, you do not need an i-Lok. POD Farm 1.12 should work with Win 10.\ Sonically PF2 is the same, but you get more flexible signal chain and access to the Plug-In.
-
Amazon returns are painless. https://www.amazon.com/M-Audio-Midisport-Portable-Interface-connection/dp/B00007JRBM
-
Midi guitars through POD X3 LIVE
Triryche replied to urtzimetal's topic in POD Farm / POD Studio / TonePort
What do you mean by MIDI guitars? -
Did you try a factory reset? Can the Line6 Updater see it?