Triryche

Are you on the latest firmware? Also, it sounds like you are no properly paired with the FX100 which would explain why save to device is not enabled. also, any changes you make on the app should change the hardware settings in real time.

POD Farm will only affect the inputs of the UX2.

I read as he only used it for 2 weeks back in 2015.

Are you saying the effects/models form those packs are greyed out?

Just for clarification: In Reaper you are selecting Line6 ASIO as your I/O device. You insert an instance of GR on your recording track. Turn on Monitoring for that track. Arm track to record.

Another thing to consider is your audio interface and getting the correct level of your dry signal into Helix Native. Presets should sound identical between Helix hardware and Helix Native when using the Helix as your audio interface. Also there are input impedance settings on the Helix hardware that can affect your tone.

Are you using standalone or plug-in?

So when you record your are monitoring with the HD connected to monitors/powered speakers, correct? When you playback your recording, are you also monitoring with the HD connected to monitors/powered speakers?

Are you selecting the proper input in the mixer view of POD Farm or Line6 Audio-MIDI control panel?

Run the newest version of Monkey to ensure you have the most recent drivers. Also make sure you are selecting the correct input in the mixer view. If you are running Gearbox I'm guessing you have a red-faced Toneport and not a black-faced POD Studio. If that is the case you likely do not have PF plug-in unless you purchased the license. Try installing PF 1 and in the mixer view make

Are you monitoring the playback the same as when you record?

Try a factory reset on the AMPLIFi and uninstall then reinstall the app.

Share it to the cloud and be sure to give it an artist name, then search the cloud by the artist name. Then you can save it to your My Tones and/or AMPLIFi.

Go to the downloads page and download the driver.

I will try to double check later thi week. I thought I had some old project with PF1 running fine in Reaper 64-bit. Not sue if you know, but in the meantime, you can reamp tracks with the PODxt.

If you purchased a Gearbox plug-in license way back when you should be able to use POD Farm plug-in.

This is note the place to vote. This is: https://line6.ideascale.com/a/ideas/search?templateId=0&query=aax

Do you monitoring turned on in Reaper?

Where does the UX2 come into the picture?

Is this how you have it connected? Guitar >> DD-7 Input A >> DD-7 Output A >> AMPLIFi Does the DD-7 have power? (9V battery or 9V DC power supply)

The UX1 does not have phantom power, so if your mic requires phantom power you will need a some source of phantom power, like a mic preamp or phantom power supply.

Yes. Look in settings on the AMPLIFi Remote app.

Definitely POD Farm 1 is what you are entitle to for free. POD Farm 2 will likely only run in trail mode, but as BillBee mentions might not hurt to try, you would have a more flexible signal path in the plug-in. What I do not remember is if PF1 can be used as an editor for the X3 hardware.

It would work, although you would be missing the impedance settings from the Helix. And if you want to monitor the Helix Native in real-time while your are playing you may encounter latency depending on your system.

One scenario would be to easily reamp dry tracks post processing and/or use the plug-in for other non-guitar tracks.