Search the Community
Showing results for tags 'jtv-69'.
-
My JTV-69's middle pickup has quit working. :( I opened her up to see if there was a loose wire that had become disconnected, but couldn't see any problem. Has anyone else experienced this or a similar problem with your magnetic pickups?
-
I bought a JTV-69 several months ago and have grown to like the feel of the guitar as a plain guitar and I like the sound of the regular pickups. But on the modeling side of the guitar, I loaded some presets that Variax user and for whatever reason, the patches altered the sustain and output to a considerable extent. So much so that I could no longer use the guitar for gigging, which was the primary purpose for me buying it in the first place. So, I tried multiple times to follow the instructions to reset the Variax to factory settings but each time I would do the procedure, instead of getting a flashing red light, I got a flashing white light and no discernable change was noticed. Has anyone else experienced this behavior? If so, were you able to resolve it and what were the steps you took?
-
Can't seem to find 2 factory spec measurements for my JTV69 or my Variax Standard tremolo rear edge height (as in pic - for a Fender it's 3.2mm) string height at 12th fret Yes, I know, I can just make it to whatever I'm comfortable with that doesn't affect playability or intonation. I'd like to be able to set it to factory standard though. Anybody know where I can find this information for the JTV69 and the Standard?
- 12 replies
-
Hi there, I have always wanted a Variax, but because I am left handed I could never get the newer ones. I see the older Variax 500 was in lefty, but they are pretty rare and go for high prices. So I decided to buy a brand new one and do it myself. It's not that hard, I promise and I am no luthier. You will probably void your warranty so do this at your own risk! 1. Remove all the strings. 2. Remove old nut by using a small block of square wood and gently tap (and I mean gently) the block of wood with a mallet. Tap in the direction of the bridge or neck to loosen the glue. And then tap it on the side to slide with a blunt screwdriver, out of the slot. Mine came out really easy and only had a drop of glue in two spots. 3. Replace old nut with the Graphtech TUSQ-XL nut, PQL-5000-L0. This is a lefty nut and is pretty close to the original. Graphtech actually supply the nut for the JTV-69 as standard, but they don't have an exact lefty copy. I sanded mine for about 10 seconds with fine paper to reduce the thickness ever so slightly and then pressed in the new nut. Sand a little, then test. It was a snug fit and didn't bother glueing. 4. Measure the saddles on the bridge (from the rear most straight edge of the bridge to the leading edge of the saddle) and write down each length according to the right handed string setup. You will then reverse all the saddle lengths by screwing them in or out according to what you have written down, with the left handed string layout. 5. Remove the cover on the back of the JTV-69 closest to the bottom. This houses the Variax motherboard. Locate the two grey wires with single white connector attached. This goes back to the bridge piezo pickups. Remove the connector. You will now need to flip the connector around so as to flip the piezos for the lefty string layout. When you plug it back you will notice that the connector doesnt quite align and fit. You will need to cut off a bit of the plastic on the motherboard part of the connector to make it fit. Its not as bad as it sounds. I then secured the plug with a bit of tape. 6. Restring the guitar as lefty, adjust the saddle heights if necessary and re-intonate. But you should be pretty close with the saddle lengths from the previous measurement. 7. Profit $$$! Only downside to this is that its a "Jimi'd" guitar and a bit difficult to reach past the 20th fret. But it plays just like a normal guitar. I dont use a tremelo so have tightened up the springs to make it as hard tail as possible.
-
I'm trying to connect my new JTV-69 variax and while the computer sees the Variax USB adapter, and the USB adapter indicates (via the two green lights) that it sees the Variax, the computer doesn't see the Variax. I've tried multiple computers and versions of the software. As far as the computer is concerned, there's no Variax there. Up front: I am using the small black Variax USB adapter and included VDI cable The battery is fully charged (though by the end of troubleshooting it only had 3 dots) I have a TRS cable plugged in I have the volume turned up The lights are on on the Variax I have two lights on the Variax USB adapter I have tried both the included VDI cable and 2 separate Cat5/Cat6 cables I have checked with Line6 Monkey on a separate computer using all of the combinations of troubleshooting I have checked with the OLD Workbench on a separate computer I have repeatedly connected / restarted / removed battery; replaced battery I have wiggled and jiggled and swabbed and double-checked all the connectors. Everything is in-place. The Variax doesn't show up, not even in Monkey. I'm really not looking forward to returning this guitar, but the inability to use it with Workbench is a deal-breaker.
- 17 replies
-
- variax usb interface
- jtv-69
-
(and 3 more)
Tagged with:
-
I remember browsing this forum a while ago, reading of an alternative to the tremol-no. Does anyone know what that is? Is there a reason why you prefer that over the tremel-no? I've been noticing that my 69's modelling (especially with the Twang and Spank) has been "plunk"-y in comparison to the magnetic pickups and my experience with single-coil guitars. I've been wondering if the floating nature of my setup is contributing to that sound. The "plunk"-yness is especially noticeable with the lower E and A strings. I was hoping a system like the tremol-no can "block" the trem and give me a livelier response on-demand (obviously, giving up the use of the trem arm). I should also mention that my guitar has a maple fingerboard, so the all-maple-ness could contribute to the softer response of the lower strings. Regardless, the 69 is an outstanding super-strat guitar. Using the non-locking-nut tremolo is as good as it gets for me: smooth action and doesn't go out of tune. It really makes playing with the acoustic models really, really fun. This guitar was my first foray into trem guitars, and I'm very happy this trem system has given me zero headaches so far!
-
I've seen a couple of guys that posted on Facebook and Youtube (links below) where they had replaced the standard tone block under the tremolo bridge of their JTV-69's with a custom "Bell Brass" version with great results. Has anyone else done a mod like this? Would this type of mod be possible by modifying an existing brass tone block that's currently being sold (FU-Tone, Guitar Fetish, etc.) and if so, does anyone have the specs on the standard tone block being used in the JTV-69 (overall dimensions, attachment screw spacing, etc.). I know that modifications would be required on anything that would be existing (6 spaces for Piezo wiring, spot for Piezo interface circuit board, etc.), or would it be better to start from scratch with a Bell Brass bar and have a machine shop replicate the original? Not sure that this mod would be worth all of the effort, but was curious if anyone had any experience with this type of mod or thoughts on the subject. Any input would be greatly appreciated! Thanks Alberto Pfeifer - Hello, i love my Variax JTV 69S, and... | Facebook (92) Variax JTV 69 upgrades an comparisons - YouTube FU-TONE.COM, OFFICIAL BIG BLOCK PERFORMANCE UPGRADES FOR YOUR GUITAR! (fu-tone.com) Upgrade Steel and Brass Tremolo Blocks (guitarfetish.com)
-
I have two Variax JTV-69s, early 2010s, both out of warranty. Variax#1: The Virtual Capo "wheel" stopped working for "model" and "normal" settings. Works for all others. Variax#2: The 5 position switch started intermittently working, then not when using standard pickups in humbucker position. Just this week, the 4th and 5th positions stopped working altogether when modeling is engaged. I suspect it's a bad switch. Tried using contact cleaner to no avail. Line 6 directed me to full compass for parts a while back. Both parts were on back order til end of January. Reached out and found out today these parts are now discontinued. Does anyone have these parts for sale from a harvested or broken JTV-69? From what I can tell, it looks like a snap together repair, or quick soldering at worst. I've repaired my own guitars for years and I'm very tech savvy. I need my guitars for live and studio, so I'm willing to try my hand at it first before relinquishing my guitars to a repair center that's well over an hour away for an indefinite period of time, plus the expense. Thanks!
-
Hey all - Does a magnetic pickup setting short that doesn't appear to exist in the same position using Variax (instead of magnetics) generally mean there's a wiring problem on the magnetic side? Or does that generally mean the 5 way switch is faulty? Not seeking a concrete answer - more like a "What are the chances of A versus B?" Background I have a JTV-69 with JBE pickups in it, and at a gig last weekend the middle pickup (when playing magnetics) crapped out. Was able to get sound via the piezo/Variax with the switch in the 2, 3 and 4 spots, but I know the switch doesn't behave like a normal 5 way so I don't know what, if anything, that means. Before I go through the production of taking everything apart, would like to know the odds that it's a wiring problem versus a switch problem - reason being the PCB replacement parts are on back order at Full Compass. If it's likely to be wiring, I'll just try to chase the short with my multimeter, but if it's likely to be a switch issue, then I'll wait until I get the replacement parts from Full Compass. The pickups were fine for years; the only thing I can think of is that the gig I played at was outdoors and it was a chilly (40-50 F) day, so maybe the failure was weather-related.
-
Hello from Germany! I just get my JTV-69 out of my bunch of various guitars and wonna have fun... As already mentioned in the title - when I turn off the electric way (playing with normal PUs) the tone poti has no effect, everything sounds "dull/dark" - no brightness. If I turn on the modelling the tone poti works fine. I really am not sure if this was the normal function when I recently used the Variax but... certainly I would heard it. Does anybody have an idea or even better a solution? I cannot imagine, that this little passive component can be broken because it works fine with different switch settings. Do I have a chance to fix it by myself when I open the guitar? Thanks so much and best regards, Wilfrid
-
Question about physically detuning both Variax Standard and the JTV69: If I want to use thicker gauge strings - say, 12s - and I detune them to compensate anywhere from one to three half steps (such that the tension on the piezos is comparable to 10s tuned normally), how are Variax sounds affected? Which I guess, really, two parts 1. How are standard tuned sounds in Variax mode affected? and 2. How are alternate tunings in Variax mode affected? Can I get away with thicker gauge strings that are physically detuned and still be able to access the full power of the Variax? I don't want to go through the whole setup process if it isn't going to work - so does it? If it matters my Standard is the Amethyst Limited Edition one. JTV69 is 5 or so years old and I haven't updated the firmware that I can remember.
- 1 reply
-
- jtv-69
- variax standard
-
(and 2 more)
Tagged with:
-
I recently bought a used JTV-69 from a studio that used it for 1 session (great deal). Took it to my tech for a setup and I noticed my g string sounds dull. Doesn't ring clear like the rest. Doesn't appear to be a nut issue as the fretted notes do it too. Also, sounds dull without being plugged in. Changed strings twice..tried 010's and 009's. Anyone out there have this issue? Maybe a saddle issue? thx guys
-
Hi All, I've a nice black JTV69, I bought it in 2011. Since then I use it almost every day. However I noticed that after some tremolo usage the guitar goes out of tune all the time. During the last string change I checked the tremolo bridge and I noticed that the knife edges seems to be really used. I took some pictures, please check them: https://drive.google.com/open?id=1AXxGWGxaZdf9hsxSTbhWW_76lOyLjxGO The problem is that, I really don't know what should I do now, because this type of bridge is very special and I cannot buy a new one in the local music stores. I found one on fullcompass but its quite expensive and I really don't need new saddles and tremolo block etc. Only the bridge plate with the kinfe edges. Have you got any idea how should I repair it? Have you got any experience about bad/used kinfe edges on JTV69 guitars? Thank you in advance! Norbert
- 7 replies
-
- tremolo
- knife edge
-
(and 2 more)
Tagged with:
-
I have a JTV-69 guitar. I would really like to change multiple JTV-69 settings with simple single button pushes. ----- For instance, with one button push, I would like to go from a 2nd pickup switch position Acoustic 1970 Martin D12-28 (a 12-string guitar) to a Lester 5th position pickup switch position (1959 Gibson Les Paul, neck pickup). Then with another single button push, I want to return back to the 70 Martin 12-string. ----- To achieve my desire, is there any Helix guitar multi-effects unit which will, with single button pushes active, change, readjust, etc. & subsequently return back the JTV-69's settings of the: [a] Guitar Model Selector, Guitar Tuning Knob, [c] Pickup Selector Switch, &/or [d] any other JTV-69 setting? Thanks, for the info. Richard, richardcuccia@hotmail.com
-
Just purchased a JVT- 69 and noticed when using the mag pickups the 5 way toggle switch works perfect but when I switch to the virtual instruments position 2 and 4 don't work right. In either position the instrument is intermittent. I have to hold the switch a little out of that location to get it to work and then when I let go, it goes back to the instrument on either side of that position even though it is still in position 2 or 4. I updated to the latest firmware and It seemed like it got worse. Has anyone else had this issue. It currently renders the virtual Side of the instrument almost unusable. I have not found anything on this issue other that one other guy made a video on YouTube and his was really bad (hence his cursing in the background).
-
Hi all, I just bought a used JTV-69, and there are a couple of issues I thought I could ask about here. First, the volume and tone knobs are reversed, i.e. the volume is controlled by the one closest to the jack, and tone is the one closest to the strings. This is opposite of what it should be right? At first I thought it was possibly something that could be changed in software, but I can't find anything like that. I guess the previous owner modified it. The other issue is probably related... the tone knob only works on the modeled sounds. It doesn't have any effect on the mag pickups. Should that be an easy fix? Thanks for your help!
-
Hi, I've scoured the forums on this and I can't seem to find all the answers to my questions. I'm interested in doing a neck transplant for my JTV-69, its one of the earliest stock of the korean versions so it does have some issues with the neck. Its now out of warranty, so I am looking to make some improvements to the hardware but I don't want to effect the technology. I'm looking to replace with a standard fender neck but the ones I can find on ebay in the UK (which are sparse as I don't want to spend 000s on a new neck. One replacement neck I am looking at now has 21 frets whereas the standard neck on the 69 has 22. Does anyone know if you can transplant a 21 fret neck onto the jtv-69? Also I am interested in turning my HSS into an SSS, probably replacing all the pickups, if anyone has had any experience of this I would love to hear it. Thanks in advance. Chris
- 13 replies
-
I've had a pair of Variax 300's for quite sometime now. They have served me well, but they can be a little............ temperamental? I never liked the feel of the necks, so a few years back I put a Variax 500 neck (ebay) on one of them. Slight mod a neck joint, but it worked out great, Last year I found another 500 neck on ebay, got it changed the second one. My question, I want to get a JV series. I don't mind either style ( 59 vs 69 ), but would like to know which neck is closer to the 500 neck. If there is a significant weight difference, I may have to consider that as well. Thanks for any info you can share. Al
-
Using my less than a month old JTV-69 the other day through the magnetic pickups, without modeling, I noticed that all the treble was gone. Turned on modelling to Lester and sound was great. All modeled tones sound great, but magnetics sounded dead. When I remove and re-insert the TRS cable to restart the guitar, the treble would temporarily return to the mags, but would fade after a few seconds. I called Line 6 and they had no clue. I called a local guy and he asked how I was connected. That was when I remembered the night before I was using without the AB box and the mags sounded fine. Over the last couple of days, when using without the AB box mags are fine, but with the XPS, they are dead. I have replaced the TRS cable on the XPS and tried it with and wothout the XLR connected, same result. Any one else using the XPS box experience such a thing? I am wondering if replacing the box will fix or if the box is only meant to be used for modeling tones only??
- 1 reply
-
- xps
- magnetic pickup
-
(and 1 more)
Tagged with:
-
Hi, has anyone done the treble bleed mod on your Variax guitar. I use the Variax with the real pickups all the time and one thing that I don't like is how the volume reacts when rolling down. I have done the treble bleed on my Strat and I guess I'm used to it so much that I can't live without it. So I'm considering doing it on the Variax too. Any experiences? Thanks
-
I have an "open box" JTV-69 on the way, but it doesn't include the USB interface. Does anyone know if this version work with it? http://www.sweetwater.com/store/detail/Workbench
-
I searched the forum (also through Google) with a few search terms, a few times, but no relevant topic found. All latest SW/FW. Workbench HD v2.12.0 JTV-89F (v2.21 [shipped with v2.10]) through USB (v1.0.7.2) connected with Windows 7 (SP1) i7 64bit laptop (directly, no hub inbetween). Is there any exclusive Models/Patches that are for the JTV-89F guitars that I can't use because of this partial detection? Although Line 6 Monkey v1.71 detected it as a general "Tyler Variax" and the flashing (EDIT3: with a correct file, manually downloaded) worked fine. But I imagine that process is meant to be compatible with as many as possible. From the download section: "The five high-gain models that were previously exclusive to JTV-89 and loaded into custom bank 1 are now available in the Workbench software by loading the custom JTV bank available online." EDIT4: Although it was preceded by: "For JTV-89 Customers Only: " which seems to contradict the buildup of the sentence that followed it with "previously exclusive". Is it exclusive or not? Does it include JTV-89F? Other Variax models? Unclear. Confusing. But more importantly, where and how exactly is it usable? Nothing in the Workbench HD manual about "online". I must be missing something.. EDIT1: is the following the only (official?) trusted resource? Share And Download 2.0+ H D Models? EDIT2: I'm also interested in Bass (HD) Models compatible with JTV-89F, any good direction in this regard would prevent me from doing something stupid to the guitar. EDIT4: Other than this issue, in my bit of experience with the guitar, everything else seems alright, and I mostly enjoy it. It wasn't tuned fully when it arrived, but that does not invoke concern. This issue does. I wanted to try to get any clarification or specific tips here before resorting to opening a support ticket. Thanks in advance. EDIT4 includes overall adjustments. EDIT5(2015-09-01): added Dropbox-hosted screen-snippets for public-viewing (it should detect as JTV-89 [normal also for the JTV-89F, not -69 [never had the -69 guitar]):
- 7 replies
-
- jtv-89f
- workbench hd
-
(and 2 more)
Tagged with:
-
If I had all the guts for a JTV 69, is it possible to connect the "model selector knob" from a JTV-59 to that circuit board? Also, does anyone have pictures of what it looks like under the pick guard of the JTV-69?
-
OOPS, sorry.