Triryche

Please try this: http://line6.com/sup...on-amplifi-r713

Try to flash your firmware on the AMPLIFi with USB Utility or an iPad/iPhone. After that you should be able to connect with an Android.

Here's a couple vids to get you started. https://www.youtube.com/watch?v=nOE-rFa1uLM https://www.youtube.com/watch?v=Xwlkphi899Q Although the first link is for the KB37, the main concepts are the same. Here's a link to the videos http://line6.com/support/page/kb/_/tutorial-videos/line-6-video-tutorials-complete-list-r202 You might also try searching youtube

Try re-flashing to the current fw. Reinstall the app. Forget the BT connection. Factory reset the AMPLIFi. Re-pair the BT. btw, what device are you running the app on?

Put your Overdrive in front of the FX100 just like you would with a real amp and adjust the output level of your overdrive as needed. Guitar >> Overdrive >> FX100

When you run the Updater Utility, what version Firmware does it show? Did you di a factory reset after flashing the firmware?

Check the Line6 Audio-Midi control panel. you may have it set to reprocess the signal.

The TT will only play back audio from your computer, you cannot route it to the effects processing. That would be a nice feature though. The PODxt series had that capability, assuming the sounds were coming from your DAW. You do not need a driver for Mac to use the TT as an audio interface, it is CoreAudio Compliant.

Try forgetting the BT connection, reinstall the app, factory reset the FX100, then re-pair. If you are still having the same issue I would open a support ticket or give Line6 a call.

Forget the BT connection then re-pair.

Please try this: http://line6.com/support/page/kb/_/amplifi-products/ampl/4-tone-lights-flashing-on-amplifi-r713

Please try this: http://line6.com/support/page/kb/_/amplifi-products/ampl/4-tone-lights-flashing-on-amplifi-r713

That's just how it is. The Master volume does not affect the s/pdif out.

Was the AMPLIFi Remote App previously working with the AMPLIFi before the attempted? If so try the update via BT again, you will need to establish a new BT connection.

You have a total of 100 presets on the AMPLIFi. Take any one of the presets and tweak to your liking then "Save to Hardware".

Can you please provide more info? Which Line6 device?

Output is the master volume of the POD. The channel volume behaves as the master volume of the AMP model.

I think the OP was experiencing "perceived" warble/dissonance as described by silverhead. I get this sometimes even with headphones cranked if the the chord of the headphones makes solid contact with the JTV body. The warble cause by the mags can indeed be remedied with pup height/intonation adjustments. AFAIK, these adjustments will not void your warranty, unless of course the Hubble trajectory is tangent to the orbit of at least one of the planets (but not all 5) in your 7th House. (disclosure, I may have fabricated a portion of that statement.)

If it is a Line Level input you do not need a DI Box.

iPhone what?

It's been several years since I used the HR-2, and I typically used it for intelligent pitch shifting. I might have time to futz around with my pedals over Thanksgiving weekend.

Try switch 1 on with the other 2 thru 4 off.

That’s what I love about the Dimension C, it can be used without hearing the ocean!! LOL When I first started playing guitar the guys at the local music store where I took lessons were ranting and raving about it, I didn’t “get it†at the time because the setting they loved so much was subtle. I was like, “Where’s the Depth parameter?â€. Fast forward a couple decades and I finally scored one on e-bay back in 2000-ish. btw, the pedal is based on the Roland Dimension D rack mount. http://www.uaudio.com/webzine/2004/september/text/content4.html The POD HD does have a model of the pedal.

Digital Audio Workstation. You should be fine micing at a gig, unless the actually playing volume is so low that the audience (or mic) can hear the acoustic sounds of you're unamplified strings and the miced sound simultaneously.

It depends on of you stereo or pc speakers. But in a nutshell, you can use either the FX100's analog outs or headphone out.The key is to keep the master volume on the FX100 very low to start and use your stereo or pc speakers volume. For example, start with your pc speakers at ~ 75 max volume and the FX100 master at 0, then carefully increase the FX100 master volume. The cables and/or adapters you need depend on the the inputs available on your stereo. What model is your stereo?