psarkissian
Service Engineer Moderator-
Posts
4,843 -
Joined
-
Last visited
-
Days Won
28
Everything posted by psarkissian
-
"How low can you tune the strings on the guitar before the piezos start to have issues? "--- About a whole step and a half. Below that, you start to skirt the limits of pitch tracking.
-
The other thing is that physically tuning down loosens the string, it also lessens the contact string tension on the piezo. That can (but not always) have adverse affects on a solid signal (amplitude and pitch stability wise). All pitch shifting starts with where you are physically tuned at. Almost nobody in the signal processing world does it differently. If there's someone out there who does, I don't know them.
-
Pitch shift interval is based on where it's physically tuned from. "Standard" is a no pitch shift setting, whatever you physically tune to, is what comes out.
-
12AX7EH,... the different gain topology settings are such that low microphonic pre-amp tubes are required, and the EH's are low microphonic. seldon1 has some interesting ideas,... very good.
- 4 replies
-
- dt 50
- pod hd500x
-
(and 2 more)
Tagged with:
-
Needs servicing at a Line 6 authorized service center.
-
Not miffed,... concerned. Don't want to see anyone get in over their heads, then come to me looking for an assist. My ability to help would be limited at that point, there is only so much I'm allowed to do. I've done my share of these mods for specific endorser clients (like left hander Carlos Rios) as favours for the top people here, and consulted on a couple of others (Flying V with JTV guts for a former service tech in Canada), so I know the pitfalls involved. I've also seen and had a couple of customer failed attempts come across my bench. So please be careful. If you can pull it off, great. If not, there won't be a whole lot I can do, especially if there's non-Line 6 device attachments involved.
-
Tremolo for fixed bridge variax 700
psarkissian replied to Johnnyau's topic in Variax Guitars / Bass / Workbench
No it's not. -
JTV 89 Sound Degradation
psarkissian replied to SLRaymond's topic in James Tyler Variax Guitars / Workbench HD
Don't spray directly into it, spray onto a cotton swab, let it drip in. -
https://line6.com/support/manuals/spiderii212/ https://line6.com/support/manuals/fbvsmkii
-
Variax repairs in Canada
psarkissian replied to dalix22's topic in James Tyler Variax Guitars / Workbench HD
When you engage the switch on the Alt Tune, the Model LED goes blue and a 2nd layer of models comes up, acoustic and electric 12-strings are among the models. Looks like you got the correct board. And that should be "Tested PBS",... PBS being my initials. Good. -
Variax repairs in Canada
psarkissian replied to dalix22's topic in James Tyler Variax Guitars / Workbench HD
Board for a 59? Have the blue layer of models? -
That will require a trip to an authorized service center in your area. Then they can contact a tech here for further tech tips on that. This is not something you can fix yourself, and a non Line 6 tech won't know how to deal with this. And they won't have schematics or access to the tech here.
-
JTV-69 Tremolo Bar
psarkissian replied to mkaylor's topic in James Tyler Variax Guitars / Workbench HD
Yes. -
LINE 6 FLEXTONE III Editing Software..
psarkissian replied to musicdudee's topic in Spider I / II / III
https://line6.com/software/index.html There's Line 6 Edit on this link. -
For recording with USB, if that happens, it needs to be taken to an authorized service center. When something like that occurs in digital domain, in any audio product, it's usually a case of loss of synchronization in the digital domain. With this product, only an authorized service center can fix that.
-
" Can you leave a variax and non-variax guitar plugged into the pod at the same time? "--- Yes. And there is an input selector that allows you to decide which one you want to enable at any given moment. https://line6.com/support/manuals/podhd500x In case you want to do a deep dive into a owners manual for more details.
-
Maybe,... could be one or more parts in the switch plunger assembly. Best have someone who knows the insides well, like and authorized service tech.
-
https://line6.com/find/service_center/ Is the link to find the one nearest you.
-
Needs to be serviced by an authorized service center.
-
No right angle VDI connector cables.
-
Line6 Pod X3 Live Sound Problem, Patches Problems....
psarkissian replied to urtzimetal's topic in POD X3
Probably needs some servicing in general, a good going over. Log a support ticket.