Triryche
-
Posts
4,254 -
Joined
-
Last visited
-
Days Won
15
Everything posted by Triryche
-
Are you using the headphone out or the Line Outs. If you are using the headphone out chances are your adapter is not stereo, also known as TRS (Tip-Rip-Sleeve) and is just mono, TS (Tip-Sleeve). -
Although it will not help soundwise, you can download the editor for free to view the parameters. And when Helix Native is released you will be able to demo it for free.
-
DI posted this somewhere: What does Helix Native cost? Helix Native sells for $399 USD. However, to hammer home the whole studio-to-stage thing, we’re offering a discount to registered Helix and Helix Rack owners; they can purchase Helix Native for $99. Existing POD Farm customers are eligible for certain discounts as well (TBD). To the best of my knowledge, the engine in PF is the same as Gearbox, and you should not have lost any amps or models that you paid for or your device(s) enabled. Also, presets in Gearbox should be forward compatible with PF. I had the Gearbox plug-in before PF came out and the transition was seamless (At least that's how I remember it, it was a while ago!!).
-
You can use the Helix Line outs to your monitors in the meantime To monitors with headphones, yes.
-
You do not have a mixer?
-
I wouldn't sweat it too much, I doubt the vocal users eagerly (impatiently) waiting and asking will change Line6's cadence of communication.
-
Something happened today at precisely 3:27 PM Greenwich Mean Time, not sure what the consequences are, but it happened.
-
When Line6 originally announced Helix Native release of late spring, did they specify which year?? :ph34r:
-
never is a bit extreme...
-
Have you opened a support ticket?
-
Well you posted in the lounge which doesn't get as much traffic as the POD HD forum. For direct support you can call Line6 or open a support ticket. But to answer your question, only the POD HD desktop, 500, and 500x are compatible with HD Model Packs. If you go to the store and select a Model Pack it lists all the compatible hardware.
-
Go to the Downloads page and from the 3 dropdown menus select your Device / Drivers / Operating system. Then run the driver installer. Downloads is at the top of the page.
-
Can you post a clip? Are you selecting the Line6 ASIO driver in your DAW?
-
Silverhead likely meant "connected to the internet". You still need to plug-in via USB. Also, make sure you download the firmware file, it is separate from the driver file.
-
I think the Line6 Updater requires you to log into your account. I wonder if you log into your account from a laptop where you have an internet connection if the Line6 Updater will allow to proceed with the flash from file. Alternatively you could temporarily connect the computer to the internet with smartphone via USB. Warning, data rates may apply. :D
-
I think it's easier to do it Workbench HD.
-
There's a Synth Harmonizer, but likely not what you;re looking for.
-
A member put together a comprehensive guide. Meambobbo Tone Guide - http://http://foobazaar.com/podhd/toneGuide/
-
Pod farm 2 not allowing authorization
Triryche replied to vincint80's topic in POD Farm / POD Studio / TonePort
Is this for a Toneport, POD Studio, or hardware independent software? -
JTV kills in club again!
Triryche replied to JTSC777's topic in James Tyler Variax Guitars / Workbench HD
Have you tweaked any of the models in Workbench HD? If not I would recommend reading the manual. -
POD XT USB V0.00 ESN 00000000
Triryche replied to uljo's topic in POD 2.0, POD XT, Pocket POD, FloorPODs
Nice!! -
POD XT USB V0.00 ESN 00000000
Triryche replied to uljo's topic in POD 2.0, POD XT, Pocket POD, FloorPODs
Unfortunately the ESN of zeros is a bad or missing security chip. Who knows, could be as simple as a cold solder joint. -
Missing effects in pod farm 2
Triryche replied to vincint80's topic in POD Farm / POD Studio / TonePort
The main difference is a more flexible signal chain. Sonically they are the same, with the exception of the signal chain, there are tones you can create in PF2 that you cannot with PF1. -
Have you tried using the Line6 Updater?
-
If you are doing any drop tunings and palm muting, it is very easy to transfer the vibrations from the A string to the low E and vise versa via the palm of your hand. This is also true with other tunings where not all the strings are pitch shifted by the same amount.
