jandrio
-
Posts
1,203 -
Joined
-
Last visited
-
Days Won
26
Everything posted by jandrio
-
Check out this one:
-
http://line6.com/support/topic/3703-volume-issues-on-hd-500x/?do=findComment&comment=24280
-
Now, if ...8 turned up to be 9, I don't mind, I don't mind... http://www.youtube.com/watch?v=VNXWMHu9An0
-
Use workbench to adjust string levels accordingly.
-
Yes.
-
u r wellcome. Hope it helped u. rgds/john
-
It simulates putting the FX after the amp-cab-mic. In the real world, it is similar to passing your miced signal thru an effect in your mixing console.
-
With a JTV, u could save ur alternate tunings plus models on each preset and change/select them thru the HD500.
-
Then I believe u should open a support ticket.
-
Re-calibration of the POD HD500's expression pedal is necessary after performing a Global Settings reset. Instructions for how to perform a Global Settings reset is available below: After POD HD500X/500 Flash/Re-Flash/Update: MANDATORY Global Settings Reset! POD HD500X/HD500 Pedal Calibration
-
@onetruevibe: Glad 2 hear you finally got it rocking... Rgds/John
-
The noise gate @100/0 has no effect on tone. Check also this one.
-
+1 to Charlie... Check also this post...
-
Decay 100%, Threshold 0%, as per dbagchee's post. The Studio EQ is NOT a mono FX, it is a "True Stereo". http://line6.com/support/page/kb/_/effects/pod/stereomono-fx-list-for-pod-hd-r567
-
+1 to Sotos.
-
Or bad? (opposite of good) :)
-
It depends on the patch. You can either send a "clean" sound, or your include your preamp.
-
"Cable-wise" splitting is the oposite of summing...
-
There are articles out there recommending not to use y-cables, claiming that "a wye-connector used to mix two signals into one is being abused and may even damage the equipment involved". Check out this one: http://www.rane.com/note109.html op download the pdf: http://www.rane.com/...Why_Not_Wye.pdf Why don't u feed your soundcard through the mixer?
-
You are welcome. :)
-
Any time. :)
-
Did you calibrate the pedal ?.
-
Use only the left 1/4 output. It sums the signal to mono. Do not use only one XLR, cause you'll get only one side of the signal. If you want to use only one XLR, place a noise gate as the last FX on your chain to sum up to mono.
-
Now, Here's My Idea Of A 'dream Rig'...
jandrio replied to Spiderplayer7's topic in Dream Rig - Line 6 Product Integration
+1 :) ps I would also add wireless VDI. -
The noise gate is the less DSP consuming FX, with no tone coloring. I believe it is the optimum choice for summing up to mono.
