ADBrown

FBV 3 will display preset information, but effect on/off is not displayed on the screen.

Every preset uses an amp model, modeled off real amps as well as some Line 6 creations. There is not a default preset or amp model. There is the option of "no amp" but this may not give the result you are looking for. You can use the Spider Remote app to edit and choose amp models as well as on the front panel; press the AMP button, then the EDIT button, then use the rotary encoder to select the amp model and scroll to change, from here you can also select "No Amp".

Hold down all three FX buttons, then press and release 'save' while the amp is turned on.

Hi GeraGrind, the things you are experiencing are certainly not intended functions. Do you experience these problems with the IEC cable that came with you Spider 240HC? It sounds like it may be something in the amp that needs to be fixed/replaced. I would recommend exchanging the unit at point of sale or opening a support ticket with Line 6.

You aren't the only user who would like to see this feature added. You can upvote this feature request on ideascale, a place where end users can post and vote on product feature requests and Line 6 product managers do check out ideascale. https://line6.ideascale.com/a/ideas/search?templateId=0&query=spider+v+editor

I am sorry to hear that is happening. If possible I would exchange it with the retailer for a working unit as it sounds like this one has some issues.

There are already a few requests for this on ideascale. You may want to up-vote those requests, instead of reposting the idea.

It's best to create and test presets before a gig at or near gig volume to make sure your tone is still best represented at higher volumes. Using different PA speakers can produce different results, for better and for worse. Occasionally there will be a PA or venue I'm unfamiliar with and I find it can be too bright, or boomy/muddy across my presets. In this case I will turn to the global EQ to tame the lows or highs. As for amplifying PC; the easiest way is to use the XLR out to FOH. Using speaker models and the XLR out puts an sm57 mic model in the signal going to the board. On Power Cab + you can change the mic model. Because the speaker in Power Cab is a guitar speaker with a HF tweeter placed behind it you can actually mic it like a regular guitar cab.

Sorry to hear that happened, I hope you are enjoying the replacement.

If you run into any trouble with a failed update or your unit will not boot up, try powering on while holding the right arrow ">" This will put the unit into update mode and you can re install the latest firmware from there. If that does not solve your issue I would open a support ticket. https://line6.com/support/tickets/

The TRS plug is used on the G10 so it an charge when plugged into the receiver, as cbrillow mentioned it dos not send or receive a stereo signal. What is the guitar you are using that is not working with your G10? Here is a link to the manual https://line6.com/support/manuals/relayg10/

Spider V currently does not have an auto-start feature, the easiest way to use the looper is to control is with a floorboard like the FBV 3. You can post feature requests at https://line6.ideascale.com/ . End users can vote on your idea and Line 6 product managers do check in on ideascale.

FBV 3 controls are pretty set, aside from moving effects around, there isn't much assignable. The up and down arrow foot-switches let you switch between banks of presets, foot-switches A-D let you access the 4 presets in that bank. FS1-5 control your effects. FS 1 & 5 will always be locked to your compressor and reverb. FS 2,3,4 are all assigned to whichever 3 effects are in the preset (modulation, delay, distortion, etc). The function button lets you control the looper. The expression pedal does have a toe tap feature meaning you can toggle between wah and volume pedal; indicated by the two lights near the heel. You can also assign an effect parameter (ex:Delay mix) to the expression pedal in place of wah.

You can find a list of presets someone previously posted by following the link below. This list is for an older firmware, so some of the presets may have changed. Though I believe most are the same.

Without a cabinet Spider V 240HC operates at 50w. You may be able to get by at practice if your band doesn't get too loud during practice, but otherwise pairing with a cab would probably be best. If your band has a rehearsal space you can leave the cab there and take the head home for jamming and practicing.

To perform a Factory Reset on Spider V: Hold down the Home button to open the settings menu. Use the rotary encoder to knob to scroll until you find Factory Reset, select the option and reset Spider V. Be sure to backup any presets you wish to save. You can use the Spider Remote app for desktop or smart device to backup presets.

It will auto shut off. I've left mine plugged in for extended durations and it has not affected the battery.

Currently you are not able to download any new drum loops to Spider V. You can always play drums loops from your iPhone onto Spider V using the Aux in or USB.

Check out the Shuriken Guitars Facebook page. https://www.facebook.com/pg/shurikenguitars/photos/?ref=page_internal

I recommend updating the firmware first, the current version is 1.01. Connect your FBV3 to a computer via USB and run the Line 6 Updater program, free at line6.com/software. If updating the firmware does not solve your issue the next thing to troubleshoot would be the cable. The FBV 3 cable is a cat5 cable, so if you have a spare ethernet cable lying around you can test to see if the cable is faulty. If none of this works to fix your problem contact customer support.

I don't think you can send audio from the USB the way you are trying. You can configure audio to be sent out of the headphone out jack, hold down the home button and scroll until you find the parameter to let the headphone jack send audio. Also the USB can send audio directly to any DAW, just plug Spider V into your computer via USB and select Spider V in your DAW's input and output settings.

I'm into playing similar styles of music; I really like the Kinky Boost, set really low, for thickening up my tone. The Minotaur drive is also really great at boosting and giving just a bit of gain, depending how you set it. The Kinky Comp can be a bit "aggressive", I typically only use it for a really tight compressed funk sound. I like the LA Studio Comp, it's fairly flexible, from a smooth/transparent to actually driving your amp a bit. Check out Brandon Coleman from Cincinnati, he uses a Helix and gets a really nice Jazz/Fusion tone.

To eliminate potential ground loop hum

Sorry to hear it came out of the box in such condition. I've always found the alternate tunings to work quite well. Going on what you said about the guitar's condition, it sounds like it needs a proper setup. If your guitar is not physically in tune or properly intonated this will directly translate to the alternate tunings. It's also important to make sure the sound of the amplified guitar is louder than the guitar. If not you'll hear the guitar tuned in standard and the alternate tuning coming out of your amplification source, which could clash in a nasty way.

Jeff is also running two Helix Racks in back!