Line6Tony

All HD Models in Order.xlsx Please open this file to see the list of all stock HD amp models, amp models added by firmware update, and amp models from HD model packs. Compiled with help from Michael Stanton (ijapos). Blackface Dbl Nrm - '65 Fender® Twin Reverb® Normal Blackface Dbl Vib - '65 Fender® Twin Reverb® Vibrato Hiway 100 - '73 Hiwatt® DR-103 Super O - Supro® S6616 Gibtone 185 - '39 Gibson® EH-185 Tweed B-Man Nrm - '58 Fender® Bassman® Normal Tweed B-Man Brt - '58 Fender® Bassman® Bright Blackface 'Lux Nrm - '64 Fender® Deluxe Reverb® Normal Blackface 'Lux Vib - '64 Fender® Deluxe Reverb® Vibrato Divide 9/15 - Divided by 13® JRT 9/15® PhD Motorway - Dr. Z® Route 66 Class A-15 - '61 "Fawn" Vox® AC-15 Class A-30 TB - Vox® AC-30 "Top Boost" Brit J-45 Nrm - '65 Marshall® JTM-45 MKII, Normal Input Channel Brit J-45 Brt - '65 Marshall® JTM-45 MKII, Bright Input Channel Plexi Lead 100 Nrm - '59 Marshall® "Plexi" Super Lead 100 Normal Input Channel Plexi Lead 100 Brt - '59 Marshall® "Plexi" Super Lead 100 Bright Input Channel Brit P-75 Nrm - '71 Park® 75 Normal Input Channel Brit P-75 Brt - '71 Park® 75 Bright Input Channel Brit J-800 - '82 Marshall® JCM-800 Bomber Uber - 2002 Bogner® Ubershall Treadplate - 2001 Mesa/Boogie® Dual Rectifier® Angel F-Ball - '09 Engl® Fireball 100 Line6 Elektrik - Line6 Original Solo-100 Clean - Soldano® SLO-100 Solo-100 Crunch - Soldano® SLO-100 Solo-100 Overdrive - Soldano® SLO-100 Line6 Doom - Line6 Original Line6 Epic - Line6 Original Flip Top - Ampeg® B-15NF Portaflex® Bass Guitar Amp HD Model Pack Models Small Tweed - Fender® Champ Jazz Rivet - Roland® JC-120 PV Panama - Peavey® 5150® (Block logo) SVT Brt - Ampeg® SVT® Bright Ch. SVT Nrm - Ampeg® SVT® Normal Ch. Mahadeva - Bogner® Shiva G Cougar 800 - GK Gallien-Kruger® 800RB Brit 2204 - Remastered Marshall® JCM800 (Model 2204) Mandarin - 80 Orange® OR80 A30 Fawn Brt - VOX® AC30 (Fawn Bright Ch.) A30 Fawn Nrm - VOX® AC30 (Fawn Normal Ch.) Black Panel Pete - Pete Anderson Custom Line 6 Octone - Line 6 Original Line 6 Insane - Line 6 Original Line 6 Big Bottom - Line 6 Original Line 6 Variac'ed Plexi - Line 6 Original Line 6 Purge - Line 6 Original Line 6 Aggro - Line 6 Original Line 6 Smash - Line 6 Original Line 6 Acoustic - Line 6 Original

Global EQ is used for compensating for the wide disparity in acoustic environments on tour or when traveling from studio to studio, and is applied to all setlists and presets. Global EQ features three fully parametric bands plus variable low and high cut filters. This feature is not available in the HD editor programs used via computer. To access Global EQ: Press and hold the VIEW button to open the Setup Menu. Using the four-way, cursor right until you see the Global EQ screen. Turn Knob 1 to select the desired EQ band (Low Cut, Low, Mid, High, High Cut) andturn Knobs 2, 3, and/or 4 to adjust the selected band. To bypass or enable Global EQ, press ENTER. NOTE—Due to L6 LINK’s flexible routing, Global EQ is not available at this output.

See enclosed spreadsheet for the list. Mobile POD Amp Models List.xlsx

When attempting to update the RELAY G10 transmitter using Windows, some users have reported that the device either does not establish a connection via USB, or loses the connection during the update. It is worth noting that Windows supplies the driver for this Relay device. There are two scenarios where the Relay device is not recognized by the updater app after connecting via USB: the updater is launched before the Relay device drivers have finished installing. This may occur more often on slower computers, computers that already have several open windows or processes, or with machines that have a slower internet connection. the "Driver not successfully installed" message appears. In this case, click "Change settings" then choose "Yes, do this automatically (recommended)" in the Device Installation Settings dialogue box, then select "Save Changes". In the event the "Driver not installed" message box is not present, you can navigate to Device Installation Settings using the following steps: Click Start, type "devices and printers" in the search box, and then click Devices and Printers. Under Devices, right-click the icon for the computer, and then click Device installation settings. Choose "Yes, do this automatically (recommended)" and select "Save Changes" button. After changing this setting, remove the USB cable, then insert it again so that Windows can detect the Relay device and install the driver for it. It is possible to see the Relay device update fail shortly after it starts. This can occur if one of the Relay device drivers has not finished installing before you initiate an update. In this case, the updater will typically display that the firmware version is unknown. The workaround here is to wait until the driver completes installation, or disconnect the USB cable, reconnect it, then start the update again. Lastly, it is worth noting that some USB cables are charge-only, so a change in cables may help. Also, trying all ports and even a different computer may resolve the issue, based on various USB port configurations.

In the AMPLIFi Remote editor, there are 10 effects blocks that you can turn on and off, and assign different models and parameters to. Some of them can be dragged to different locations, some can't. Of these ten blocks, only three of them can be assigned as: Drives and Dynamics Mods Delays Filters, Synths and Pitch A quick way to tell which three can be assigned these effects types is that they have a border around them: Notice Stomp, Synth and Mod all are bordered. However, Reverb is selected, so its border is brighter. Here's how to change the effect type of those three blocks: 1. Select one of the three blocks by touching it. In this example, we'll select Stomp. 2. The effect will then show the effect type (in this case, "stomp"), the effect name ("Facial Fuzz"), and a power button to the right to turn the effect on or off. Touch the effect type to change it. 3. You'll then see a "Type" button. Touch it. 4. The block types then appear. Choose one. 5. Lastly, select an effect and touch OK. 6. The block has been changed. There is no restriction on the number of similar effect types or effects assigned to these three blocks. Three stomps, each with a Fuzz Pi on it? Knock yourself out! Just don't forget to save your tone (cloud icon, then disc icon).

All 4 tone lights (or ABCD lights on the FX100) flashing is 'recovery mode'. It is the intended behavior after a failed update. If you come across this mode, you must attempt to update the AMPLIFi again. Power down your AMPLIFi. When updating via PC, please connect the USB cable and make sure to boot the unit while holding Tone+Tap (amp, TT) or A+C (FX100) to put your AMPLIFi into Update Mode. Run the Line 6 Updater program found at www.Line6.com/software. For a guide, please refer to http://line6.com/support/page/kb/_/amplifi-products/ampl/how-to-update-amplifi-with-a-pc-r701. If you still get failed updates from the Line 6 Updater, try another USB cable and port as well as another computer When updating via an iOS device, Bluetooth works in recovery mode, but the pairing from before the failed update is not maintained. You must press the Bluetooth button and pair again from the smart device's Bluetooth menu. You can then proceed with the update.

Q: If the AMPLIFi product works as a sound card through USB, what would be the way for connecting a pair of studio monitors to do the mixing with? How does the IO on AMPLIFi with USB recording enabled work? Is it a 2-in/2-out? If so, does AMPLIFi act as the 2-out monitor? A: The AMPLIFi amp becomes your sound card when using USB to record, so while you're recording using an amp, it's easiest to monitor computer playback through the amp – it really does sound great. You could always use the headphone outs to get a direct signal into studio monitors via a mixing board or other solution, but the intent is to use the amp for monitoring – at lease while you are recording. Once you are done recording, you can can mix using whatever setup you like. For AMPLIFi TT or AMPLIFi FX100, you would just connect monitors to the main outs on the units. Q: What bit depth and sampling rate can you use when recording with the AMPLIFi series? A: The AMPLIFi series can record in 24bit with sampling rates from 44.1k up to 96k on Windows and in 24bit with sampling rates of only 48k on MAC OSX. When using the AMPLIFi series for operating system audio you can adjust these within Control Panel on Windows and System Preferences on MAC OSX. When using the AMPLIFi series within a DAW, you can adjust these within the Audio Preferences/Options of the DAW. Q: What operating systems are the AMPLIFi series USB audio drivers compatible with? A: Our Windows ASIO USB audio driver is compatible with Windows 7 and Windows 8 and can be downloaded from our software HERE. The AMPLIFi series is CoreAudio compatible on MAC OSX 10.7 and above, therefore does not require the installation of any additional drivers.