Please ensure Javascript is enabled for purposes of website accessibility Jump to content
Line 6 Community
Welcome to the Line 6 forums!
Apply to Join our Public Beta Testing Program!
Helix/HX preset transfers to Helix Stadium
Helix Stadium is here!
POD Studio owners: Line 6 Monkey and Line 6 License Manager retiring on April 10th, 2026
Stadium presets and clones on Customtone!

Triryche

Line 6 Expert
 View Profile  See their activity

  • Posts

    4,254

  • Joined

  • Last visited

  • Days Won

    15

 Content Type 

Everything posted by Triryche

  1. Triryche
    Likely a communication issue. Try deleting and reinstalling the app. Also forget the BT connection and reconnect. If you recently upgraded the firmware make sure to do a factory reset.
  2. Triryche
    On some machines you may be able to use a USB audio interface while only controlling the PODX3 via USB.
  3. Triryche
    Is this an older "red-faced" Toneport or a newer "black-faced" POD Studio? If it is an older Toneport and you never paid for a PF2 upgrade it will not run properly.
  4. Triryche
    They can work with a powered hub, in conjunction with a computer, and on some machines it works properly with a hub vs the pc's ports. But I think the OP was wanting to use an mp3 player with just the UX2 and a powered hub and no pc.
  5. Triryche
    Short answer: You can not use the UX2 without a computer. It is a USB Audio interface for your computer. The computer does all the processing.
  6. Triryche

    Android App

    Triryche replied to rustyjuggler's topic in AMPLIFi

    I don't think it is THE reason, but I'm guessing it is part of it. The CRL sandbox is a lot bigger on a pc's os then an Andriod os.
  7. Triryche
    No one knows what tomorrow knows. The manual states USB for future use. I sure as heck hope it will be a future fw update!! Or at least a flash utility.
  8. Triryche
    FWIW, on the FX100's current fw, the pedalboard's display will not reflect a bank/preset change from the AMPLIFi Remote app. For example, if you are on 1A, you navigate to 23C via the app, the FX100 still displays 1A even though the current tone being processed is 23C. hit the B,C or D FS and the prest will be 1B, !C, 1D (respectively).
  9. Triryche

    Android App

    Triryche replied to rustyjuggler's topic in AMPLIFi

    It's been pointed out more than once, but just for posterity. http://opensignal.com/reports/fragmentation-2013/ I imagine this is one of the reasons they developed the app for iOS first. I personally would rather see PC connectivity before an Android app.
  10. Triryche
    You should be able to with an iOS7 device.
  11. Triryche
    Yes, just select "No Cabinet" for each signal path.
  12. Triryche
    It's likely because the Trankliink is not an ASIO device. Do you have the standalone license for PF2 or a Line6 interface? If you have just the standalone, you could try recording you guitar into Reaper without PF2 and then add the PF2 plug-in post processing.
  13. Triryche
    Go to the downloads page. Under software there is POD Farm (right above POD Farm 2). (Support>>Downloads). But the best is to download the newest Monkey and have it install the drivers and POD Farm for you. It may let you install POD Farm 2, but you can skip that since you do not have the license. (It will run but in trial mode with limited amps/effects). After that you will need to run the License Manager.
  14. Triryche
    Not sure the UX2 comes with Ableton or Riffstation. Make sure you are selecting the Line6 ASIO drivers in your DAW. As or MIDI, at this point I wouldn't worry about it until you get more accustomed to recording, but long story short, you can not record a normal guitar via MIDI.
  15. Triryche
    The setup is the same. But if you are connecting your speakers directly to the GuitarPort, there is no need to connect the Headphones to your Mac, unless I am understanding something.
  16. Triryche
    I used a bookshelf stereo system for a couple years with satisfactory results while I saved up for monitors. IMHO, JBL's, M-Audio, and KRK active monitors are all very comparable at the lower price point range. I am personally partial to JBL's. There is nothing wrong with 5" monitors, but if it were me and I could stretch the budget, I would try to get into the 8" category.
  17. Triryche
    First thing I would check is to make sure you are using the Line6 ASIO driver in Cubase. Also be aware that there are up to 4 channels available to Cubase from the UX. Then in PF2, check your record sends in the Mixer View. How do the waveforms look? It is possible for digitally clip going into your DAW but sound fine on the monitors.
  18. Triryche
    Check the app for firmware updates. Settings>>Device Flash
  19. Triryche

    USB port

    Triryche replied to Mikey333's topic in AMPLIFi

    Good question! I for one hope, at the bare minimum, it will be the ability to flash the fw, those BT flashes are brutal!! An editor for PC/Mac would be awesome too.
  20. Triryche
    What would be cool is to have the ability to assign the FX to the pedal allowing you to change a setting on the fly. I submitted the idea to IdeaScale. http://line6.ideascale.com/a/dtd/AMPLIFi-FX100-Assign-Pedal-to-Tweak-Function/626369-23508
  21. Triryche
    Recording via USB with the 500 is your best option right now without you purchasing other gear. MIDI is a different story entirely, it contains no sound, just numerical information.
  22. Triryche
    Download the newest Monkey from Line6 to get the latest drivers and software. If you cannot register it and purchased it as new, I would contact Line6.
  23. Triryche
    I decent Hi-Fi will suffice, but studio monitors are a great investment, especially if you plan on having a home studio.
  24. Triryche
    Yep, that's what I was getting at regarding adjusting settings and saving it to the hardware. To reassign the FX knob, tap and hold it in the app.
  25. Triryche
    If you have an X3 Live you already have the plug-in version of POD Farm 1 with all the model packs when using the X3 as a dongle.
×
×
  • Create New...