Search the Community
Showing results for tags 'trouble'.
Found 17 results
-
Always internet connection error. Right usernname and password. Is it a serious line6 customer care service? No way to have back or save new patches. And without having the login, stops you to use the "clouds" icon (to name for example the patches)
-
Ok here's what happens, just bought this HD300 and it's not recognized by my 2 computers. Installed monkey, drivers, and it installs as unknown device. If I go in the driver properties, I see Mbox instead of Line 6 Pod hd300. I manually switch it to the correct one and it's still not detected by monkey or hd300 edit.Ok here's what happens, just bought this HD300 and it's not recognized by my 2 computers. Installed monkey, drivers, and it installs as unknown device. If I go in the driver properties, I see Mbox instead of Line 6 Pod hd300. I manually switch it to the correct one and it's still not detected by monkey or hd300 edit. I'm on windows 8 64-bit. Tried multiple usb plugs: usb 2.0, 3.0, 2.0 with speed charging. Always the same. Also tried multiple versions of monkey and the driver, always from a clean install. Nothing. Here's what I get, seems monkey never sees the driver installed even though I see it in device manager. I also have a ticket open and didn't get a reply for a week now... Here it is: Pod HD300 Firmware 1.10 Connecting through USB to 2 different computer with Windows 8 64-bit, latest drivers and monkey. Not recognized. Driver is being installed as Unknown Device. If I go check the properties, it says the unknown device has the driver of a Digidesign Mbox. When manually changing the driver, it doesn't go through. Tried reverting to previous drivers and monkey, still not detected in Monkey. This is on both computers. Help please! thank you
-
Hey Guys! I've got a M5 pedal, that was dying slowly, as I thought. It was stuck in one preset, was rebooting constantly and no sound produced. I've tried to update the firmware, but it failed. Then I've managed to reset it to factory settings and it worked (actually I did it twice). Pedal does produce sound now, but it behaves not quite like it was before. It doesn't activate a preset until I tap both buttons. So I can scroll through the list of presets, but it would sound like the last preset I've edited. Then I tap both buttons and the selected preset activates. Before the reset it activated selected preset instantly. I've bought my pedal from a person, so I don't know how it should work with factory defaults. Maybe I could set it up to activate presets while scrolling through them? P.S. Also the expression pedal doesn't work with it anymore. Little dots appear, but no changes are made by the exp-pedal. But I'm not sure if it's working by itself.
-
HELP!!! I have a Variax 700 bass with VDI cable, it does not work with HD500x pod or pod XT live bass. Connecting to the XT Live pod freezes the screen. Until the cable is unplugged, it will restart. With the HD500x pod, I connect a regular RJ45 cable and work for a while but then the HD500X pod restarts. The VDI cable works well with JTV59 variax Can anybody help me? -
Hello dear users, Do one of you know a proper way to unplug the Line 6 Pod Studio (UX2) from a Mac ? Because sometimes it cause a crash, and restart the computer. Thank you in advance !
-
Pretty odd. I went to change a patch and my LCD screen flipped backwards. Now everything in any screen is backwards on my LCD screen only. Scribble strips are good. All the buttons under the LCD screen still think everything is normal so they adjust the parameters originally associated with them but not the parameter newly above the knob. The joystick also is reverse sensing, i.e. left is right now. Did I hit some magic combination of buttons to cause this? How do I go back?
-
Hey guys, Im having trouble with my XLR microphone that is hooked up to my UX1 interface. The green light is on indicating that the computer has detected the device (and yes I downloaded the drivers from this site) but it is still not picking up sound. I have tested this mic before and the interface but it doesnt seem to be working this time. PLEASE HELP THANK YOU VERY MUCH
-
I cant get a USB-connection going in my DAW when I connect my amplifi tt to my computer via. USB. Thats my problem. It doesn't appear as a device in Reaper at all.. When I plug in my amplifi to my computer via. usb it tells me it fails to install unit drivers? I've had a lot of trouble updating my Amplifi to latest patch and Im not even sure it's done correctly. I tried locating amplifi drivers and updates on my PC, in the hope that I could do it manually, but nope. Line 6 dont have any software for amplifi products available for downloading I guess. Im very frustrated, please help
-
Well... First of all. Excuse my english, im spanish speaker, so i'll do my best. I bought this amp years 4 or 5 years ago. I used it without a problem for months, i was happy... Then, while i was playing, it starts to turn off and on while i was playing LIVE on a gig. I looked around here, and there, for a solution and i didnt find it. Some people had this problem with their Spiders, so i wrote to some guys with this issue (In this forum) and they told me that couldnt find a soluticion. They said "I didn't get mine fixed.. I took it back to where I bought it and got a refund". The lollipop thing is, im from VENEZUELA and bought this amp in USA and Line 6 dont exist here! So i cant take it back and get refund, i cant send this amp to Line 6 to technical support or whatever... And still didnt find a fukin' post, tutorial, video, or whatever to fix this lollipop. I really feel stolen from Line 6. -
I've recently got problems with a clicking noise when I use my POD HD500X. At first I suspected my guitar, so I made sure everything was tightened properly. It didn't help, and I also noticed that I get this noise from all of my other instruments. It doesn't matter if I use the mono outputs, headphones or use the POD as audio interface. I've tried to reinstall all software with Line6 Monkey, and the problems remain. Here's a video describing my problems: I'd appreciate all kinds of suggestions for solving this :)
-
I just purchased this new line 6 pod and i would love to use it but every time i connect it to my computer and turn it on it doesnt install the driver or it will say no driver help ive downloaded the line 6 monkey and it isnt detecting it help please
-
Wasn't sure what topic to put this under, but I've had this Backtrack + mic for about 2 or 3 years now. The battery won't charge anymore when I plug it into my USB port on my MAC. It used to charge fine a few months ago, I haven't used it in a while. The battery is dead, but it won't charge. Upon plugging it into the USB port, I turn the switch on to the middle notch. It turns on with the white light, then it flickers red and orange--indicating that it's dead. Then it turns off. It won't charge even though its properly plugged in! HELP?! Does it need a new battery???
-
Hallo guys! My english is really bad, but i try explain my problem. I have Line 6 pod HD 300. The first idea when i bought it: "you need to put 2.01". And when i started patching i had trouble 80006000. Older topics not help me. Of course I'm using windows 7. Help me please, I'm confused
-
Hi guys Been jamming today with my LTD SC-607B through the POD HD Bean, and all was good at first. Switched it off, came back later and then, without tweaking my patch at all, I started to get this annoying noise trailing my chugs. I have tried out a few lead cords and the same thing, and I am getting the same noise through both bridge and neck pick ups. Here is a recording of what I mean. Its driving me crazy. Like I said, it was fine just minutes earlier until I turned it off for a while. Came back and here we are. https://soundcloud.com/sdsm/my-song-2 Anybody else experienced this or something similar? I just put in a brand new battery for my EMG's too I have tried plugging the POD into other power sockets around the house and same thing I have tried another guitar with passive pick ups and same thing This comes on randomly from time to time
-
Hello, I have a problem with jTV-69. Often spontaneously disconnected modeling, when I play in amp. Also shootdown of modeling happens and modulation indicator lights red. And still happens when you connect variax to line6 podhd500, pod freezes and reboots. What can I do? Firmware update does not help -
Hey guys! New to the forums. I have one simple question. I just ordered a new set of knobs for the spider valve and noticed that the knobs braking are quite common. My problem is that i can't seem to get the old broken knob to come off. Anyone else out there with this problem? Any help is much appreciated Thank you, Nick
-
Hi I recently bought a POD GX to start recording and ever since I got it, I have been wasting countless hours trying to get a decent sound that doesn't clip the audio recording. I am recording with a Ibanez K5 and Ibanez SRX690ex. I first tried using Audacity but then I tried the Reason software that came with it and it sounds exactly the same if I was to record it with Audacity. The bass on the heaviest string always clips the audio and sounds like farting noises and the higher notes don't sound good at all. I noticed the sound doesn't sound too bad if the volume in which I am recording is low but that kinda defeats the purpose of recording since I'm trying to put my bass tracks over music. How can I get good crisp and clear tone from my bass that is loud and doesn't clip or sound like farts? Basically if you have a setting with pod farm I would like to know what settings to use and what exactly to do on Reason or Audacity to make it ready to go on a track and not sound bad?
