Search the Community
Showing results for tags 'problem'.
-
Hi All, lately I am having quite a lot of trouble with my Pod XT Live floor effects. When I call up a patch while playing, it will sound OK for the first few seconds and then lose some volume and sound really dull. Also when I have selected a patch the screen on the pod will change between the name of the patch and the dialling buttons (like when you edit the patch) I hope this makes sense. It will keep on doing this constantly. Anybody have any ideas on how to fix this? Because for the moment I am thinking of throwing the whole unit out and getting a different one as I am gigging 2 / 3 times a week I have to be able to trust on my gear. Any help is welcome. Thanks in advance. -
Hi All, I had a rummage through the forum and couldn't find anything similar :-/ The problem: Pedal C and Modulation pedal both don't work: no light when pressed; no change to function; i,e, Rest of the unit can't see those 2 pedals being pressed. Everything else works fine. What happened? The power supply socket on the motherboard came a bit loose, and power was cutting in and out. - I opened the POD. Got the motherboard out. HAD TO DISCONNECT THE RIBBON CABLE from the motherboard (the one that goes to the two pedal banks. Also disconnected the ribbon cable at the Volume/wah pedal end. - Unsoldered the power socket from the motherboard - it did have a broken leg. Soldered in a new one - power was all good after that. But..... Having put the motherboard back into the top half of the POD body, and reconnected the ribbon cables, although the power is fine, and all the functions work, Two pedals don't work: Pedal C and the Modulation Pedal. i.e. the LED doesn't come on, and the functions don't change. ALL the other pedals and functions are fine. I used a circuit tested to confirm that the buttons behind the two offending pedals are both fine - they behave exactly like all the other buttons when they're attached to the circuit tested and pushed. So, I suspect there's a problem either in the ribbon cable, or somewhere beyond that. ...and that's where I'm stuck. Help!! Is it time to sell this XT Live for spares? Is there an easy fix? Something else??? Thanks in advance :-) -
Hi, I bought Helix lt in April 2018, since then I was very satisfied with this unit. Since almost 2 months, the Helix onboard expression pedal is behaving very random, being this the second or third time it happens to me: The expression pedal stops working for no reason. The switch toggle from exp 1/exp 2 works fine, I've tried switching presets, snapshots, switching from exp 1/2 , deleting Volume block and adding it again, new preset with volume block, etc. Im thinking also in a factory reset, cause this is very annoying. The worst part is that it happens while gigging, from one part of a song to another, the pedal stops working. I don't want to lose confidence on this unit but it's giving me a hard time. If I'm using it for swelling, well , it is a FAIL if the unit's expression pedal behaves randomly. I have external expression pedals, but using one doesn't fix my issue. The first time it happened to me, it lasted like 1 hour or so, this time I don't know. I just switched it off cause I was tired . I started to look on google hoping to know what was happening, but I think it only happens to me, since there's no other cases like mine in forums, at least. While digging I found out this thing has an optical sensor, but nothing else. Maybe that's the trouble, the damn sensor. Can you help me with this? Thanks
-
When I change the channel, (clean, crunch, metal, insane) The volume goes up all the way. I already tried factory resetting it, but the problem persists. What can I do to fix this??
-
I was playing with my spider iv 75 and suddenly it stopped and the panel went crazy as you can see in the picture. I can't change anything. Any solution for that? thanks
-
Hello, I've been using the HX Stomp as a travel rig. I like it a lot, only problem is the expression pedal doesn't seem to calibrate properly. I've searched the internet up and down to no avail. How do I calibrate my Dunlop expression pedal to work as 0 being heel, and toe being 100? Currently, regardless of my min/max setting, the HX believes the halfway point is 100 and goes back down to zero. I'm not using a TRS cable to connect the expression pedal. Thank you
-
Does anyone else have the issue of glitchy unreliable footswitches on the Helix? I've had two units The first had 4 unreliable foot switches after a month of use at home.. And after 6 months or so the joystick failed totally so the store got me a new unit. That one now has 2 unreliable footswitches... problably more to come. I'm really taking good care of the unit, so I'm left to think there is a general quality issue with these footswitches. However Line6 Support tells me otherwise: Hi there, sorry for the trouble with your Helix. The defective switch needs to be replaced by our service center. Therefore please contact your Line 6 reseller from where you've purchased the unit - or alternatively you have the option to contact our Danish service center directly: Highend Skjulhöjalle 57 Vanløse, 2720 +4538711114 info@highendmusik.dk We haven't received many requests regarding footswitch failures and the repair should solve the issue. Nonetheless I will pass along this information to the product teams, so they can look into it. Best regards xxxxx Technical Support Line 6 Support Europe And I don't really want to pay for repairs of a lollipop quality component, in an otherwise nice product.. Am I really one of few having this issue?
-
Hi everyone. I have a problem with my PODxt. I bought in shop much years ago a PODxt, a Bass PODxt and a FBV Express (this is not MKII). I used both POD with my FBV Express without problem, until one day, various years after, I thought to register here only my PODxt and downloaded some sounds of others users here. Well, since then, my PODxt stopped working with my FBV Express, however my Bass PODxt working perfectly with my FBV Express, like it always did. I think that the problem appeared when I registered my PODxt here. The result: the FBV express get the changes from the PODxt but the PODxt don´t get the changes from the FBV Express, a serious problem, the FBV Express no working with the PODxt. The Line6 support told me that is a problem unknown here and that I could make it one factory reset ti the PODxt and I did it. The PODxt only has the factory sounds now but the problem persit. The Line6 support send me to places with many links with solutions of problems of the others users, but that doesn´t help me. Could somebody help me, please?. Thank you so much, greetings form Spain. -
Hi there, Wow, long long time wothout posting here ;o) I am still the owner of a mark 1 SV 112 and still hppy with it. I never experienced the overheating DSP problem leading to neverending ressting of the amp, but it is true that I seldom used it at high volume for long periods of time. I only gigged twice with it and have played it in my personal home studio at home mostly. What I would have liked to know is if this problem is systematic with MK1 SVs or if it is completely random. I mean, have there been random series that have the problem and others that don't have it ? I have the Strymon SVPre that I installed when it came out and the DSP board is, it seems, the first make (Revision A from 2007). So far, I have never experienced the problem. If I ever do, I'll try to fix it with a heatsink on the overheating areas of the board, but I'd really like to know if this is a randomly happening problem. If not, I might have just got a series without the flaw and I'll be glad about it ;o) Thanks a lot for your answers. Jay
-
I have a JTV-69 (Korean) paired with an HD500x and the acoustic models are giving me a major issue w/ the sound when hitting certain frets. Typically the string/fret that make this noise is A-7&8th fret and also D-4th fret. The sound is almost like a feedback and horrible resonance sound where the sound is much louder than the other frets. Anyone else notice this issue with the acoustic models. -
So, I bought a Vetta 1 combo today and it was working perfectly in the store. I brought I home and plugged it in and was presented with this (see image) the screen looks garbled and wonky. I took it back to the store because they have a 60 day warranty on used items and i won’t have it back for about 2 weeks. Does anybody know anything about this? I thought it had something to do with the internal battery but I just want to see if anyone here knows anything about this.
-
Bonjour est-ce que quelqu'un a déjà rencontré ce type de problème avec son port USB hs après avoir appuyé sur le bouton GROUND LIFT SWITCH de HÉLIX FLOOR ? J'étais en répétition ,mon hélix floor branché XLR Outs sur ma sono Yamaha et sur mon Mac via USB HX Edit , pour affiner et mémoriser tous mes réglages avant le concert, ce que je trouve qui est très pratique sur HÉLIX LINE6 . Quand tous les réglages ont été réalisés, j'entendais quand même un petit bourdonnement et j'ai voulu appuyer sur le petit bouton GROUND LIFT SWITCH en espérant supprimer ses petits bourdonnement et là MALHEUR MALHEUR en appliquant sur ce petit bouton j'ai entendu un petit claque et je n'avais plus de connexion entre mon HELIX FOOR et mon MAC et HX Edit me dit que je ne suis plus connecté . Mon HELIX FLOOR a tout juste deux ans et demi il n'est plus garanti . Donc j'ai envoyé mon HELIX en réparation à OXYGEN SAV à Lyon, pensant que cela n'allait pas me coûter très cher , Et là le gros claque oxygène qui me coupe le souffle avec un devis de réparation d'un montant de 422, 94 € Ouf. Je ne vais malheureusement pas pouvoir le faire réparer et d' être obligé de devoir m'en servir sans cette option qui est très coûteuse . Donc plus de mises à jour et plus d'achat en boutique ,où j'avais déjà pas mal investi entre hélix native tous les pack et IRS que j'ai acheté en boutique. Je suis donc très très déçu d'avoir touché à ce petit bouton pour moi le problème pose plus car je ne peux pas le faire réparer mais je le dis pour les autres faites attention si vous voulez appuyer sur ce petit bouton ça peut coûter très cher. DEVIS_154400.pdf -
Hi, I've just got a new Spider V 20 MkII as an upgrade to my Spider III. I was surprised and disappointed to hear the loud buzzing and high-pitched whine coming from the amp on all settings except clean. My Spider III is completely silent on all modes, including INSANE. The Spider V is pretty much unusable because of the noise emitted when there is no significant input from a guitar. I have tried changing guitars, changing instrument cables, using different power sockets, moving to different rooms, but nothing seems to improve it. I can remove a lot of the noise using the Spider Remote noise gate and adjusting gains, but I don't see why that should be necessary with out of the box, factory preset tones. Is there something wrong with my Spider V amp or is this just something this amp does? Any help in getting rid of this unwanted buzz and whine is appreciated. Thanks
-
I have an interesting bug in my Shuriken Variax I need to fix Whatever 12string guitar I use theres a problem with D string. When I play open D string the parallel (high) note is not in octave but octave plus one halfstep... Therefore only this string is out of tune. Funny thing is when I start pressing frets on D string the harmonics are octave as the shoud be... This bug is only while playing open D string. Any ideas how to fix it, Already went through factory reset. Thanks Zabis
-
Hello, bought a brand new HX Stomp. It won't connect to my pc (Windows 7 x64). Problems found: - USB Audio Device has a driver problem. - HX Stomp doesn't have a driver. Are the driver available for download somewhere? None of the software provided, in the Downloads section of Line6's webpage, are able to "see" my HX Stomp.
-
Hi I have a problem with my Line 6 POD HD500X. I can’t use POD to changing preset on Neural DSP. I have a MacBook Air and use USB- MIDI interface Cable converter to connecting POD to computer. This is my settings: POD Gereral settings Midi chanel 1 Midi out/thru Preset settings Midi chanel 01 Message CC CC#001 Value 000 Neural DSP settings Type CC Preset Channel 1 CC #1 Please help me... -
HX Stomp hangs after 1.5-2 hour of use, the device gets unresponsive and there is no sound at all (bypass isn't working). Sometimes reboot helps, sometimes it hangs on reboot as well. The device itself is very warm, maybe it is overheating or something. The firmware is 3.11. What should I do with that?
-
Hi, I would really appreciate someone's help on this! The issue is that I am running in parallel mode and the EQ on the parallel channel is affecting the entire sound. Here are the specifics: On the parallel channel I am running both the "Simple Pitch" and then the EQ "Low and High Cut" . I need to EQ the "Simple Pitch" because it is too bright for my purposes so I want to reduce the high end frequencies of only the "Simple Pitch" sound, which is on the parallel channel. The problem is that the EQ "Low and High Cut" is definitely affecting the entire sound. It should only affect the sound of whatever is on the parallel channel. Please let me know what I am doing wrong. Thanks so much, ric
-
Hi, I got my G10 in June 2016 and was happy it with until it started to fail on me 6 weeks ago. It would have drop outs or no connection at all. It would not charge. Leaving receiver and transmitter disconnected from usb and each other for a few hours remedied the problem a few times. Now it won't work at all. I observed the following LED lights on the transmitter: A: continuosly orange B: quick flashing sequence green-green-orange C: slow flashing sequence green-green-green-green-orange When not having the transmitter plugged into it, the receiver will always pulse white. Plugging the transmitter into the receiver will make the receiver either go red pulsating with the transmitter doing B or white pulsating or white continuously with the transmitter doing A or C. Trying to update the firmware fails with error (The transmitter displays as firmware version 0.00). Guess I will have to send it back, but I would be interested in the meaning of the funny A, B or C lights of the transmitter, and what does the angry red puls of the receiver stand for? Tanks, steve
-
Hi! I have a problem, I use the pod hd500x and an engl invader, I connect the midi in of the amplifier (configure omni engl) to the pod, I configure omni in the pod, and it changes the channel, that is, it communicates well, I can change the variax preset, the effects preset by fxloop, and the amp channel with its gains, noise gate, volume A / B, etc. my problem is that when I connect the guitar cable it makes a lot of noise, like fireworks, and it only disappears if I remove the midi, which prevents me from changing the channel of the engl, although if I use the FX loop, If I do without the 4-wire method, it happens to me that with the guitar's wireless it goes well, but as soon as I put a cable instead of wireless it puts noise again, until I disconnect the midi out of the pod .. I don't understand what happens What is different about the wireless cable? ... In the end in summary I can use the pod well as long as I use the z15 to change channels. But I want everything from one, that I have already seen that it is possible, but the noise prevents me. I have to find the one who communicates well via midi and voila Can you give me any suggestions? I change the omni of the pod for a specific channel? Any opinion or criticism is welcome.
-
Hello, So my problem is : I've bought a POD Studio UX2 the last week, just received it today, and when I try to register it doesn't work and this line appears : "ESN could not be verified. Please confirm the supplied USN. ( Error: 523)". ... I'm really embarrassed and I don't know what to do, because I'm sure this product was new and unopened (the packaging was okay...)... So what can I do? Is anyone here who has solved this problem before? Thanks for helping. -
Not so long ago, I began to notice that I don't like the sound of helix. The main problem is that the signal does not seem to be hot enough. It's like the volume on the guitar is slightly lowered. And everything was fine before, but I don't remember what update this problem started with. I tried different guitars (prs sc250, esp horizon with emg), tried turning on/off the PAD button, tried resetting to factory settings. Tell me what the problem may be, otherwise I have already broken my brain) I forgot to say that I play through studio monitors, but it also sounds the same when recording
-
Hello all. I’ll try my best to explain this, I’ve only been playing a bit over a year so my terminology is sub par. I bought this amp for $400+ effing dollars and within 2 months of owning it, I go to practice and I notice my sound is now very fuzzy and bassy. It was VERY crunchy, clear and metal sounding, but now it is so fuzzy that I can barely distinguish my notes when fast picking or fingering......sounds like total crap TBH. I have never moved the amp since I brought it home. No liquids, physical damage, weather damage or anything. Curious what I can try to fix this? I’m somewhat tech savvy, and would really rather avoid paying more to get it fixed when I can barely afford the $400 amp itself. I’ve gone through all the settings, factory reset it, but nothing. It will randomly work for a minute or two out of nowhere, but will go back to sounding awful soon. Adjusting the Input jack has no effect to the sound. One thing I noticed, is when this happened, the built in tuner stopped reading my input..... would act as if I was unplugged. The tuner has since started working again, but the speaker itself (or the software, not a clue...) still sounds very Fuzzy with low distortion, low clarity, and very bassy.
-
I need help! Once upon a time, when I would download presets from the site, they would probably come up with their snapshots. Maybe I accidentally touched something, I dont know. But today, when I download Frist I get it without the snapshots. For example there is a preset that I downloaded last month, and the exact same preset that I added again now. And suddenly he has no snapshots. What can I do? Anyone know? See photos. -
Hi! Just got my Line 6 UX2 (with black front). In box there was Podfarm 2.5 CD included but i downloaded from internet. Installed everything needed: License manager, Line 6 Monkey and Farmpod 2.59. For some reason farmpod is not authorizing even tho my computer and UX2 are authorized under license manager. (images attached). Also i can't load or save tunes, what the f am i missing here ?? I'm running windows 10. Thanks in advance.
